[pure-silver] Re: bad vibrations

don't have that model but on an L1200 the fan is in the head. The fan is 
mounted on a rubber block to absorb vibrations. There is a transit screw which 
needs removing from the fan and reduces vibration dramatically. Don't know if 
there is something similar on your enlarger but if there are tubes then it 
sounds like fan is not mounted in the head.  In which case, is the enlarger 
mounted on a solid floor or is it standing on boards. If its on boards then try 
stamping on floor to see if it causes vibration because if it does then it 
could be you moving about that causes the problem.

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: