[pure-silver] a recent problem with fine dust on negs

I have a problem I've never had before, and I'm not sure why. The last few times I've processed film the negatives have had lots of very fine dust that shows up terribly on prints. If I rinse these cut negatives and hang to dry, they're better. I'm rinsing the same way I always have when I process, so what could be the problem? I usually hang the negatives to dry in my shower, and I have recently with this problem. Last night I processed film and hung it in my darkroom. Same problem.
THe only change has been that we recently changed from well to county water. That shouldn't make a problem like this, should it?
I process, rinse, stop, fix, use perma wash, rinse in running water, then rinse in distilled water. I hang the negatives with clothes pins on a coat hanger, in the shower. We're careful not to sprinkle anything (like baby powder) in the bathroom when negatives are hanging. It's the same process I've always used. What could be causing the problem that I'm missing? 

Thank you,

Janet
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: