Hi Richard,
>
> It could still be incomplete fixing. Some methods of
> agitation will cause more flow at the edges of a print than
> others. This can also be true of washing. The blotchy effect
> sounds like insufficent fixing to me.
> One way to find out is to test the print using either the
> sodium sulfide test or the Selenium toner test. The Selenium
> test is simply a solution of KRST diluted 1 part toner to 9
> parts water.
Place a drop of either solution on a clear area of the
> print or film. Leave for a minute or two and blot off. There
> should be no visible stain.
I just did above test with KRST 1+9, no visible stain (the print was
untoned)
I got offlist an JPEG which npretty much showed the same phenomena,
golden brown colour in a small "grey-zone", only on a partculair size of
paper
Best,
Cor
============================================================================================================To
unsubscribe from this list, go to www.freelists.org and logon to your account
(the same e-mail address and password you set-up when you subscribed,) and
unsubscribe from there.