Eugene Barrington wrote: > Thanks for that info. I'm using the Kodak product which is anhydrous (I > think). Obviously not much is required for my modest needs! I'll break > out the FB paper and produce some real prints - but RC is so handy and > washes so quickly! Toning and hypo clearing in the one bath is another > time and water saver. > Eugene B. I should have made clear that the dilution of toner selected is to guarantee a *minimum* of 5 mins in the toner/PermaWash soup. My typical toning times are more like 6-8 min, with the toner (Kodak Rapid Selenium) diluted in the 1:25 to 1:30 range, depending on the paper in question. > > > On 3 Dec 2008, at 20:56, Tim Daneliuk wrote: > >> Eugene Barrington wrote: >>> Dear listers - >>> I find that Washaid solution goes stale long before I finish it. Using >>> it straight from the packet how much would I need to make up, for >>> example. a litre of solution? >>> TIA >>> Eugene B. >>> >>> ============================================================================================================= >>> >>> >>> To unsubscribe from this list, go to www.freelists.org and logon to your >>> account (the same e-mail address and password you set-up when you >>> subscribed,) and unsubscribe from there. >> >> I buy liquid PermaWash in gallons. I add 1.5oz of this to 1/2 gallon >> of water and an appropriate amount of Selenium toner to simultaneously >> tone and hypo clear. ("Appropriate amount" here is a toner dilution >> that requires at least 5 minutes of toning time - the time recommended >> by PermaWash to do its job - that will also tone the paper in question >> to the level desired.) The amounts involved are very small and >> inexpensive, thus I use this as a "one shot" solution that is discarded >> at the end of a printing session. >> >> >> >> -- >> ---------------------------------------------------------------------------- >> >> Tim Daneliuk tundra@xxxxxxxxxxxxxx >> PGP Key: http://www.tundraware.com/PGP/ >> >> ============================================================================================================= >> >> To unsubscribe from this list, go to www.freelists.org and logon to >> your account (the same e-mail address and password you set-up when you >> subscribed,) and unsubscribe from there. >> > > ============================================================================================================= > > To unsubscribe from this list, go to www.freelists.org and logon to your > account (the same e-mail address and password you set-up when you > subscribed,) and unsubscribe from there. -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@xxxxxxxxxxxxxx PGP Key: http://www.tundraware.com/PGP/ ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.