[pure-silver] Re: Wash aid


----- Original Message ----- From: <Johnsimage@xxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Monday, February 27, 2006 7:57 PM
Subject: [pure-silver] Re: Wash aid


Hi Larry,
If I was in the city that might be the answer. I'm working off a well and
have just installed a rhino filtration system in order to print. It is actually
a four stage system good for about 300,000 gallons. My well pump comes on
about every twelve minutes while washing.
Just want to use a wash aid to reduce wear and tear on my systems.
I'm going to try the Arm & Hammer suggestion and compare it to HCA. I will
report my findings to the list.
Sales of my black & white prints have increase dramatically over traditional
color and Epson prints lately.
Cordially,
John


  What method are you going to use to compare the two?

---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx 

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: