[pure-silver] Re: Stand developing

Hi Jeffery,

Hope I'm not the reason for Your ruined film:-O
First of all, I think 30 min is to short, I gave mine one full hour, and it looks to be about perfect for my style. I know nothing about sprocket hole, I tried on 120 film. Streaks usually comes from wrong agitation. I used my normal agitation method, slowly inverse the thank upside down, turn the tank 180* horizontal, and back up. The whole process within 5-6 sec. than repeat during one minute.

danny


Well, I gave it a shot - Rodinal 1:100 for 30 min. at about 72 deg. Strong agitation for the first 30-40 sec., then let it sit.

Most of the frames turned out OK (if a bit thinner than expected), but a few frames (with wide expanses of clear sky) showed sprocket- hole streaks. Not pronounced, but enough to ruin the frame. Seemed inconsistant thru the roll.

Not sure what to think.




Yesterday I was running a test through a Rolleiflex MX EVS I've been replacing the lens on, and thought I would test out stand developing since there was no important pictures on the film.

It was FP4 exposed at ISO125 in Rodinal 1:100 at 20*C for one hour, and they came out great! I don't have any darkroom at the moment, I've just bought a new house so everything has been packed down, but it looks like it will print great. It came out great on my scanner <http://tinyurl.com/8d9cx>http://tinyurl.com/8d9cx

I was wondering what other film/developer combo is suitable for stand, and what time and temp You are using....

thanks,
danny


====================================================================== =======================================
To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.




´¯'·.¸¸..><((((º>.·´¯'·.¸¸.·´¯'·.¸><((((º>¸.·´¯'·.¸. ,.
...·´¯'·..>><((((º>¸.·´¯'·.¸.·´¯'·...¸><((((º>¸.·´¯'·.¸. ,.

Danny Twang
Aallsgate 15C
N-3922 PORSGRUNN
Norway

danny@xxxxxxxx
http://www.dannytwang.com


Other related posts: