[pure-silver] Re: Stand developing

Well, I gave it a shot - Rodinal 1:100 for 30 min. at about 72 deg. Strong agitation for the first 30-40 sec., then let it sit.

Most of the frames turned out OK (if a bit thinner than expected), but a few frames (with wide expanses of clear sky) showed sprocket-hole streaks. Not pronounced, but enough to ruin the frame. Seemed inconsistant thru the roll.

Not sure what to think.



Yesterday I was running a test through a Rolleiflex MX EVS I've been replacing the lens on, and thought I would test out stand developing since there was no important pictures on the film.

It was FP4 exposed at ISO125 in Rodinal 1:100 at 20*C for one hour, and they came out great! I don't have any darkroom at the moment, I've just bought a new house so everything has been packed down, but it looks like it will print great. It came out great on my scanner <http://tinyurl.com/8d9cx>http://tinyurl.com/8d9cx

I was wondering what other film/developer combo is suitable for stand, and what time and temp You are using....

thanks,
danny


=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: