[pure-silver] Re: Speedotron 2401A
- From: Bill Stephenson <photographica@xxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Thu, 5 Oct 2006 15:56:28 -0400
You're all making available light sound more and more attractive! <g>
On Thursday, October 5, 2006, at 11:03 AM, Nick Zentena wrote:
On Monday 02 October 2006 10:28, Bob Randall wrote:
On 10/2/06 9:24 AM, "Ralph W. Lambrecht" <info@xxxxxxxxxxxxxxxx>
wrote:
This is also recommended by Speedotron if the unit was switched off
in
the 1/4 or 1/2 power setting. One has to wait for 10 seconds before
turning the units on again, otherwise the switch could burn out,
according to the manual.
Also, if you put a head into the 400WS plug in full combined setting
you
will blow out the circuitry for the 400WS plug.
I asked Speedotron about this. Their response is
"This only applies when using a 105 Quad head
with both cables in the 400 ws plugs WITH BOTH
ratio switches in combine. For all other use it is
okay to use the 400 ws plugs on their own."
Nick
=======================================================================
======================================
To unsubscribe from this list, go to www.freelists.org and logon to
your account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
- References:
- [pure-silver] Re: Speedotron 2401A
- From: Nick Zentena
Other related posts:
- » [pure-silver] Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
- » [pure-silver] Re: Speedotron 2401A
On Thursday, October 5, 2006, at 11:03 AM, Nick Zentena wrote:
On 10/2/06 9:24 AM, "Ralph W. Lambrecht" <info@xxxxxxxxxxxxxxxx> wrote:This is also recommended by Speedotron if the unit was switched off in
the 1/4 or 1/2 power setting. One has to wait for 10 seconds before
turning the units on again, otherwise the switch could burn out,
according to the manual.
Also, if you put a head into the 400WS plug in full combined setting you
will blow out the circuitry for the 400WS plug.
I asked Speedotron about this. Their response is
"This only applies when using a 105 Quad head
with both cables in the 400 ws plugs WITH BOTH
ratio switches in combine. For all other use it is
okay to use the 400 ws plugs on their own."Nick
======================================================================= ======================================
To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.
============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.
- [pure-silver] Re: Speedotron 2401A
- From: Nick Zentena