[pure-silver] Re: Speedotron 2401A

On Monday 02 October 2006 10:28, Bob Randall wrote:
> On 10/2/06 9:24 AM, "Ralph W. Lambrecht" <info@xxxxxxxxxxxxxxxx> wrote:
> > This is also recommended by Speedotron if the unit was switched off in
> > the 1/4 or 1/2 power setting. One has to wait for 10 seconds before
> > turning the units on again, otherwise the switch could burn out,
> > according to the manual.
>
> Also, if you put a head into the 400WS plug in full combined setting you
> will blow out the circuitry for the 400WS plug.


        I asked Speedotron about this. Their response is

                "This only applies when using a 105 Quad head 
                with both cables in the 400 ws plugs WITH BOTH
                ratio switches in combine.  For all other use it is
                okay to use the 400 ws plugs on their own."

        
        Nick
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: