[pure-silver] Re: Sink Project update

Well working on the final install now.  Mine isn't nearly the length of yours.  
Its 50 inches or about half, but the space isn't there for more.  Using your 
theory to get the water down, Id only need about a half inch or so which I can 
slip that much under two legs if need be (and somehow I guess it might)

Plumbing was something Ive never enjoyed.  Don't asked me about the broken 
plastic box around the washing machine hook ups when trying to tee in the 
drain.  At least its all back together now, but I do have drywall work to do 
now that I hadn't planned on doing.  Such is life.  I of course have one small 
drip to fix there before putting everything in its spot for good.

If anyone wants pics of this creation, let me know.  I wouldn't want to tie up 
a connection even with a small image of someone still using dial up.

Robert Hall <robert.g.hall@xxxxxxxxx> wrote: Mark,
  
 As you might see in the 7th image here http://roberthall.com/newdr/ 
  
 I have 2 GFI outlets. I cut them into the back board and sealed them with 
silicone. They have worked quite well.
  
 My sink is 36 at the bottom with 7 inches on the sides. I like it that way so 
that I can lean a little on the sink edge.
 
 I have a about a 1 inch per 8 feet of a tilt on the sink. I found it still 
needs a little push to get all the water out near the bottom. The 2 inch 
overall lift on 16' has little effect on trays and water level. 
  
 Send pics when done!
  
 Robert
 
 On 2/23/07, Mark Blackwell <mblackwell1958@xxxxxxxxx> wrote: No problem but I 
want to get it installed before I do that. The construction phase is finished.  
The primer is drying now and paint and sealer should be on this afternoon.  The 
plumbing also likely will be done today, but then again its plumbing. lol  

Bogdan Karasek <bkarasek@xxxxxxxxxxxx>  wrote:
  Hi, Since a picture is worth the proverbial thousand words, after all we 
are photographers and not word smiths, then perhaps, if you have access 
to a digital camera, a couple of pictures would be nice. 

Cheers,
Bogdan

Mark Blackwell wrote:
> Well I thought Id pass along an update on the construction for what its 
> worth to those out there and as a thanks to those that have helped.
> 
 > First the sink is physically complete now as far as actual construction. 
> Some basic decisions I made. First is rather than to attempt a slant 
> for drainage, which I could have done, some thought made me think that  
> being level would likely have more advantages than the downside of 
> having to push the water to the drain once a session. If it really gets 
> to be a problem, just a couple of thin wooden spacers type things under  
> one leg should put the slope in the system should I need it.
> 
> Second is I decided on a height that put the bottom of the sink at my 
> arms extended level. No stooping needed. Its about 8 inches deep, but  
> it actually ended up with the top being right at my navel which seemed 
> just right for me. Once built, I felt no need for a wider rail for 
> comfort, at least not yet. Again that option is still open, but I don't  
> anticipate that need.
> 
> There is room underneath with two stretchers to support a homemade 
> papersafe that I made a long time ago. It should fit right under there 
> and some storage should be available on the floor underneath it. 
> 
> So far everything seems to fit. One thing I am going to have to address 
> is an electrical outlet that is now behind the sink. At first I thought 
> it was on a GFI circuit being close to the washer, but I haven't been  
> able to confirm that by either popping the GFI breakers in the main 
> breaker box or using the test switches on the other GFI sockets in the 
> house. That will get changed out for safety, though I am not sure if  
> the outlet will really have functional value unless its moved. Its 
> still just too close to water for my comfort with safety as a concern. 
> It might be the wife and not me that gets shocked. Either way I am in  
> BIG trouble. lol
> 
> One feature I did add for a couple of reasons. There was no more room 
> to make it bigger, but I only had room in it for 2 16x20 trays. That is 
> a problem. To get around that I cut a few pieces of wood the width of  
> the sink. Underneath I put cleats so they would fit just inside the 
> sink sides and keep the wood from sliding off the rim of the sink. 
> These are about 3 inches wide and remind me of the slats in an older  
> bed. Trays not can be placed on them for an over and under 
> arrangement. Developer over stop, fix over wash. There is a bit of 
> space that they can be far enough apart to make slipping them from top  
> to bottom as easy as possible. Not ideal, but I had no better one for 
> the space available. Put together it can be used as a section of solid 
> workspace.
> 
> Will be primed, painted and sealed tomorrow as well as the plumbing. I  
> chose to make a 3 valve system with only one spot for a hose. One valve 
> for hot, one cold to adjust temp, and a third after its mixed at a tee 
> so the water can be turned off, but not have to readjust hot and cold to  
> get the same temp. One add on that won't be in the original works is an 
> inline temp gauge. Ive gotten by this long without one, a little longer 
> won't hurt.
> 
> Hope some others have found this helpful and I appreciate the advise  
> from those that have done it.
> 
> Mark
> 
> ------------------------------------------------------------------------
> Don't be flakey. Get Yahoo! Mail for Mobile 

 > and
> always stay connected 
> to 
> friends.

-- 
________________________________________________________________
Bogdan Karasek
Montréal, Québec e-mail:  bkarasek@xxxxxxxxxxxx
Canada

"I photograph my reality"
__________________________________________________________________


=============================================================================================================
 
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there. 

  

---------------------------------
 Need a quick answer? Get one in minutes from people who know. Ask your 
question on  Yahoo! Answers.  





-- 
Robert Hall
www.RobertHall.com  

 
---------------------------------
Check out the all-new Yahoo! Mail beta - Fire up a more powerful email and get 
things done faster.

Other related posts: