[pure-silver] Re: Sepia Toners
- From: titrisol <titrisol@xxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Mon, 28 Jan 2008 22:32:10 -0800 (PST)
Thanks, I know of their archival qualities and the range of hues that can be
attained with dilutions.
After I setup my darkroom again I'll try bleach/tone to see what happens
Richard Knoppow <dickburk@xxxxxxxxxxxxx> wrote:
----- Original Message -----
From: "titrisol"
To:
Sent: Sunday, January 27, 2008 10:42 PM
Subject: [pure-silver] Re: Sepia Toners
> Then you make me wonder.
> Ihave always liked viradon, the new one is still OK with
> warmtone papers.
> But I have never tried bleaching before viradon.... would
> it act as an indirect toner then?
> Would it sulfide the images, thus producing some light
> brown tones (sepia like)?
>
>
The original Viradon was a combination of polysulfide
and selenium toner, the later version had only the
polysulfide. Kodak also made a combination toner called
Polytoner.
Polysulfide toners are simple and quite effective.
Kodak Brown Toner is a polysulfide toner. One advantage of
these toners is that they tone all densities equally so that
they can be used for partial toning for image protection.
The reason Kodak Rapid Selenium Toner is not long
recommended for image protection of microfilm is that it
does not tone low density areas as quickly as high density
ones. So, when used in the high dilutions that were
recommended the lighter densities remain unprotected. A
greater amount of toning does protect the entire image but
for microfilm use the greater amount of toning was
undisirable for various reasons. The current recommendation
is KBT or some other polysulfide toner. The later version of
Viradon was also a poly sulfide toner.
These are "direct" toners and can be used in a way
similar to the hypo-alum types except that the image color
may not be the same. Kodak has a published formula for a
polysulfide toner but I don't have it at the moment. Its not
as concentrated as KBT but Dr. Nishimura, of IPI, told me it
was suitable for image protection purposes.
I have also posted in the past a couple of formulas for
combination toners made from KBT and KRST with some added
alkali. These are evidently not identical to Polytoner but
produce similar results.
KBT or Viradon are similar to other direct toners in
that they tend to produce colder browns than the bleach and
redevelop type.
---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
- References:
- [pure-silver] Re: Sepia Toners
- From: Richard Knoppow
Other related posts:
- » [pure-silver] Sepia Toners
- » [pure-silver] Re: Sepia Toners
- » [pure-silver] Re: Sepia Toners
- » [pure-silver] Re: Sepia Toners
- » [pure-silver] Re: Sepia Toners
- » [pure-silver] Re: Sepia Toners
- » [pure-silver] Re: Sepia Toners
- » [pure-silver] Re: Sepia Toners
- » [pure-silver] Re: Sepia Toners
- » [pure-silver] Re: Sepia Toners
- » [pure-silver] Re: Sepia Toners
- [pure-silver] Re: Sepia Toners
- From: Richard Knoppow