[pure-silver] Re: Mistakes Galore

>A few years later, I was working, freelance, out of a commercial studio in
>Palo Alto CA and they got a job in to develop a dozen sheets of 8x10. I had
>developed a lot of 8x10 film using hangers and hard rubber tanks, but this
>studio didn't have the equipment. So I developed them in a tray, just like
>I had developed pack film previously. Pack film is very thin and limber.
>8x10 sheet film is very stiff and rigid. All of the 8x10 film came out
>scratched to kingdom come! The customer WAS NOT happy. I learned the tray
>developing lesson the hard way.
>
>:-)
>
>Jim


Simple way to solve the problem of scratching film during development is to 
simply forget to load the holders before going to the field.   <:-|



=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: