On Friday 08 September 2006 13:47, Justin F. Knotzke wrote: > Hi, > > I have an Omega DII which is mounted to a baseboard. I believe I am > limited to 11x14 with the column I have. > > Any hints or tips on what people have done to get bigger prints ? It's more then that isn't it? Use a shorter lens. A wide angle enlarger lens if possible would add some size. But depending on the format even a slightly wider lens will increase the size some what. I don't rememeber the DII can you remove the baseboard and focus on the floor? Depending on how the baseboard connects you may be able to just put a spacer block in. Simplest would be a different enlarger. My beseler will handle some thing like 24x30 with a 135mm lens using a 4x5 negative. Nick ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.