[pure-silver] Re: Help removing (metol) stain.

Back in my "lab-slave" days (first job), we used a lot of trisodium  
phosphate solution to clean all sorts of residue from tanks and trays.  
Worked pretty well, as I recall.

-Bill

On Sunday, January 30, 2005, at 03:59  AM, Christopher Woodhouse wrote:

> Whenever I develop a film in Perceptol, I am left with a grey slime  
> over my
> tank and reels. I assume it is a metol by-product, since I don't have  
> this
> problem with any other developer.
>
> Is there an easy way to clean the tank and reels? (The tank I can wipe  
> with
> a cloth, but the reels are more tricky and resist attempts with a nail
> brush)
> --  
> Regards Chris Woodhouse ARPS
>
>
>
> ======================================================================= 
> ======================================
> To unsubscribe from this list, go to www.freelists.org and logon to  
> your account (the same e-mail address and password you set-up when you  
> subscribed,) and unsubscribe from there.
>

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: