[pure-silver] Re: Enlarger lens

On Friday 29 June 2007 06:50, İbrahim Pamuk wrote:
> Hi,
>
> Can anyone compare Rodenstock Rogonar-S and Nikkor both 50/2.8? Any commet
> on Printz 35/4 since I need to print larger where 50mm is not enough. One
> other way may be putting a special piece which will be made on request to
> extend the length of Durst so that 50/2.8 be able print larger.


        Does the baseboard come off? If it does you can place the enlarger on 
an open 
table and focus on the floor. Or can you turn the head around on the column? 
Also to focus on the floor? The photo of the Durst 850 I found looks like it 
has a straight up/down column. That can be a pain with larger prints. 

        I think the Rogonars are the Rodenstock mid range lens. If you're 
buying used 
how the lens was treated might matter more then anything.

        Nick
============================================================================================================To
 unsubscribe from this list, go to www.freelists.org and logon to your account 
(the same e-mail address and password you set-up when you subscribed,) and 
unsubscribe from there.

Other related posts: