[pure-silver] Re: Enlarger lens

Thank for the kind reply.
 
I have Durst M805 Color which I bougt secondhand recently. What I plan to make 
is to order specially an extention which will tak eplac ein between the borad 
and the pole of the enlarger. Hopefully 30cm extention will solve my problem. I 
have found 35 mm/4 Printz lens, but before doing anything I prefer to use 
Rodenstock Rogonar-S and Nikkor 50/2.8. 
 
Regards
 

Ibrahim Pamuk
Genel Müdür Yardımcısı / Deputy General Manager
Vestel Savunma Sanayi A.Ş. / Vestel Defence Industries

Birlik Mah. 14. Sokak 4
Çankaya Ankara 06450
Türkiye / Turkey

Tel: +90 312 496 21 00
Fax:+90 312 495 43 53

  

 

________________________________

From: pure-silver-bounce@xxxxxxxxxxxxx 
[mailto:pure-silver-bounce@xxxxxxxxxxxxx] On Behalf Of Craig Schroeder
Sent: Friday, June 29, 2007 2:07 PM
To: pure-silver@xxxxxxxxxxxxx
Subject: [pure-silver] Re: Enlarger lens


I believe the of the two 50mm's, the Nikkor would perform better on large-sized 
prints.  What Durst model do you have?  Would a drop section in your table work 
to extend the distance?  Is this a rig for very much use or a limited project? 

İbrahim Pamuk wrote: 

        Hi,
         
        Can anyone compare Rodenstock Rogonar-S and Nikkor both 50/2.8? Any 
commet on Printz 35/4 since I need to print larger where 50mm is not enough. 
One other way may be putting a special piece which will be made on request to 
extend the length of Durst so that 50/2.8 be able print larger.
         
        Regards
         

        Ibrahim Pamuk

         


=============================================================================================================
 To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: