[pure-silver] Re: Enlarger Lamp Life

You know what they say about overlooking the obvious - well, I thought that might be the problem. I use a metronome as a timer. As a result I switch the power on at the transformer each time I make a print. If I had an inline switch or timer I could leave the transformer powered on continuously. Would this make a difference -perhaps there would be less of a jolt to the lamp itself? (I'm only guessing here.) 

Eugene

On 28 Oct 2008, at 04:03, Jacques Augustowski wrote:
I think there is an AC capacitor in parallel to one of the windings, fiddling with the value changes the regulated output voltage. It was a long time ago that I played around with CSV transformer. 
Richard might know more about them
My preference is a regulated 117 V DC. But there is catch in using DC to feed lamps, the filament burns only in one side. The Beseler enlarger uses a 82v lamp, it is easier to regulate 117v to 82v. In my hook up I used a transformer that delivers at least 170v ACx 5A, very heavy. Now someone could build a regulated switching power supply weighing a pound and delivering 600w, that's the power computer PS uses. 

Jacques


----- Original Message -----
From: Nicholas O. Lindan
To: pure-silver@xxxxxxxxxxxxx
Sent: Monday, October 27, 2008 10:09 PM
Subject: [pure-silver] Re: Enlarger Lamp Life

"Richard Knoppow" <dickburk@xxxxxxxxxxxxx>

> One virtue of a CSV is that the output shuts down
> completely if its shorted.

They don't really shut down, they deliver a constant
current when they are shorted are quite content to
deliver this current forever.

A foible of CV transformers is they draw the same power
from the AC line no matter what: a 500W transformer will
draw 500 watts with no load, with a 500 watt load or with
a dead short across it's output.

I was filing a patent with the same attorney who represented
Sola (the largest maker of CV transformers), we got to talking
about CV's and it was his opinion that no one at Sola, or
anywhere else for that matter, really understood how they worked.

--
Nicholas O. Lindan
Cleveland Engineering Design, LLC
Cleveland, Ohio 44121
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = ====================================================================== To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there. 



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.175 / Virus Database: 270.8.4/1751 - Release Date: 10/27/2008 10:44 PM

Other related posts: