[pure-silver] Re: Easel masks?

Nick, the 2800 series is designed for 16"x20"down to 4"x5".I have never
tried non standard sizes so I don't know if the ribs are going to be a
problem. I rotated the paper so that the 10" side was against the rail. It
appears that only one print edge rests against the ridge. This ridge will
stop the print from rotating in one direction, and if it start moving
towards the opposite ridge, the print shift only to rest against the
opposite ridge.
Jonathan Ayers [mail1@xxxxxxxxxxxxxxxxx] 

-----Original Message-----
From: pure-silver-bounce@xxxxxxxxxxxxx
[mailto:pure-silver-bounce@xxxxxxxxxxxxx] On Behalf Of Nick Zentena
Sent: Friday, June 22, 2007 9:53 AM
To: pure-silver@xxxxxxxxxxxxx
Subject: [pure-silver] Re: Easel masks?

On Friday 22 June 2007 10:59, mail1 wrote:
> Nick,
>  I use black mat board for RC paper, and a 20'x24" vacuum easel with a
> black mat board for FB paper. To process you can use a Jobo 2800 print
drum
> system by adding 2 2870 modules to a 2830 tank. The tank would be 32"
long.
> This tank would handle 16"x30" easy. A tank with a single 2870 module
would
> handle 16"x20" print The solution beaker in the lid holds 300cc which
might
> be enough to process print on a single use of the solution.200cc solution
> is adequate for 16"x20". You could lengthen the beaker if you needed more.
> The drum works this way you load the print pour in solution. Secure cap,
> turn on lights, lay drum on side which introduces liquid from beaker, then
> roll on table top.


        Will the ridges inside the 2800 tank work with 12" paper? I hadn't
thought of 
using two extensions. The beaker volume isn't a big issue. All you need to
do 
is fill it. Turn it on it's side so the chemicals flow into the tank. Pop it

back up and pour in the rest of the chemicals. I do that for film in the 
print tank.

        Nick
============================================================================
=================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.

No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.472 / Virus Database: 269.9.6/862 - Release Date: 6/22/2007
3:04 PM
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.472 / Virus Database: 269.9.6/862 - Release Date: 6/22/2007
3:04 PM
 

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: