[pure-silver] Re: Devere 108 trouble

Perhaps one of the new bulbs you installed was bad. Just because they were new doesn't mean they were all good. 

Shannon Stoney wrote:
This morning I turned on the Behemoth in the darkroom and it worked fine. Went back in the house for a while, came back with a different negative, turned it on again, and no light. The fan came on, but the enlarger head lights did not. So I thought a bulb was burned out (there are eight and if one goes, the light won't come on at all), and I replaced them, not knowing which one was bad. Wrong. That didn't fix the problem. So I went around looking at all the wires and connections (there are a lot) and everything looked tight. Is there anything else I should check? this enlarger is pretty old and I got it second or third hand. Somebody put it together for me, as it's pretty complex. I called the guy that usually helps me with it, but I think he may not be in the business any more, and anyway, he didn't answer his phone. 

--shannon
============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there. 



--
John Bower -- Studio Indiana
http://www.studioindiana.com/

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: