[pure-silver] Re: Common Printing Mistakes


> -----Original Message-----
> From: pure-silver-bounce@xxxxxxxxxxxxx [mailto:pure-silver-
> bounce@xxxxxxxxxxxxx] On Behalf Of eroustom@xxxxxxxxxxx
> Sent: woensdag 25 juni 2008 3:49
> To: pure-silver@xxxxxxxxxxxxx
> Subject: [pure-silver] Re: Common Printing Mistakes
> 
> As for number 2, a friend taught me to scratch the sheet (finger tip
not
> nail) and listen to the difference between emulsion and paper sides.
Works
> great.
> 

..great tip, I'll try that next time, I usually carfully lick/wet a tiny
corner and than taste/feel (emulsion side is slippery)..;-)..

Best,

Cor


> 
>  -------------- Original message ----------------------
> From: "Nicholas O. Lindan" <nolindan@xxxxxxxxxxxxx>
> > Instead counting takes,
> > what are your most common mistakes?
> >
> > #2) Exposing pearl finish RC on the wrong side
here.
============================================================================================================To
 unsubscribe from this list, go to www.freelists.org and logon to your account 
(the same e-mail address and password you set-up when you subscribed,) and 
unsubscribe from there.

Other related posts: