[pure-silver] Re: Arista Edu Ultra 400 B/W Bulk Film
- From: titrisol <titrisol@xxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Mon, 30 Oct 2006 00:08:51 -0800 (PST)
Spec sheets are used as a guide.
It depends on how you expose your film, small variations in
water temp, etc etc etc etc
So 12 minutes is too high, and 11 minutes work for you it is not
uncommon.
--- "hankpix@xxxxxxxx" <hankpix@xxxxxxxx> wrote:
> Arista's spec sheet for Arista Edu 400 Ultra B/W bulk film
> cites a developing time of 12-13 minutes in D-76 1:1 at 68
> F/20-C. I've found that even at the low end of these suggested
> times (12 minutes) the results are much too contrasty.
> At 11 minutes, however --which is the time I use for Ilford
> HP5 -- the results are much better.
> Has anyone had a similar experience with the Arista Ultra
> 400 B/W film?
> Thanks,
> Hank
>
____________________________________________________________________________________
Everyone is raving about the all-new Yahoo! Mail
(http://advision.webevents.yahoo.com/mailbeta/)
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
- References:
- [pure-silver] Arista Edu Ultra 400 B/W Bulk Film
- From: hankpix@xxxxxxxx
Other related posts:
- » [pure-silver] Arista Edu Ultra 400 B/W Bulk Film
- » [pure-silver] Re: Arista Edu Ultra 400 B/W Bulk Film
- [pure-silver] Arista Edu Ultra 400 B/W Bulk Film
- From: hankpix@xxxxxxxx