[pure-silver] Re: Agitation Plan for Nikor 4x5 Tank

  • From: Jean-David Beyer <jeandavid8@xxxxxxxxxxx>
  • To: pure-silver@xxxxxxxxxxxxx
  • Date: Sun, 12 Feb 2017 01:51:45 -0500

On 02/11/2017 05:09 PM, Richard Lahrson wrote:

I just got a Nikor 4x5 tank in stainless steel that
holds 12 negs.  Checking the web history, results
seem to vary.  Anyone here use one?
The secret seems to be correct loading and
agitation plan.  I've got a lot of Panatomic-X aerial
to cut up and try for even development.
It would seem best to load up and drop the spiral
in the tank with developer.  I'm going to use
Rodinal at high dilution.  The tank doesn't leak so
the old inversion method works. Plus it's adjustable
for smaller size sheet film, even 2 1/4 x 3 1/4.
Thanks! Rich


I used to use 1/2 gallon sheet film tanks (stainless steel from Calumet)
for developer, stop and fix, and two rubber tanks for KHCA and selenium
toner. I used stainless steel hangers to hold the film. This worked
fine, but I did not really like processing in the dark.

I switched to Jobo CPE-2 processor and 4x5 drums and reels. At first,
the uniformity was unsatisfactory, but then they came out with new reels
and now uniformity is the same as my tank method. I do not suppose you
can get these anymore. If you can find them, be sure to get the 2509N reels.

N.B.: I am not trying to convince you to switch to Jobo system. Loading
the Nikor stainless steel reels and tanks (at least for 35mm films) is
much easier than loading Jobo's plastic reels.

-- 
  .~.  Jean-David Beyer          Registered Linux User 85642.
  /V\  PGP-Key:166D840A 0C610C8B Registered Machine  1935521.
 /( )\ Shrewsbury, New Jersey    http://linuxcounter.net
 ^^-^^ 01:45:01 up 3 days, 13:55, 2 users, load average: 4.20, 4.33, 4.35
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: