[pure-silver] Re: AW: Re: Teltenal film processor
- From: DarkroomMagic <info@xxxxxxxxxxxxxxxx>
- To: PureSilverNew <pure-silver@xxxxxxxxxxxxx>
- Date: Mon, 29 Nov 2004 17:54:37 +0100
Well, I find a 3-bath process too limiting. I use a second fixing bath, a
toning bath and a hypo-clearing bath in addition to the usual steps.
How do you cope with all of that?
Regards
Ralph W. Lambrecht
On 11/29/04 11:46 AM, "Laurence Cuffe" <Laurence.Cuffe@xxxxxx> wrote:
>
> With a review like the one you've given below how could I not buy it!
> Thanks for all the help
> Larry Cuffe
>
> Michael W. Hilgert wrote:
>> This small wonder can do anything as long as it is a 3-bath process.
>> Presoak and washing steps do not count into the 3-bath-Process, water is
>> taken out of the waterbath.
>> Every part of the process is programmable, not in %, but as exact as in
>> 1-second steps. Each step. Temperature range von 18=B0C to 40=B0C. =
>> Rotation
>> speed also full adjustable. The processor is fully automated, i.e. after
>> having stored the program (9 program-channels) you literally just hit
>> start - after some time the machine says "beep" and you take out your
>> film.
>> For a long time a was dreaming of an autolab (ATL3), but since I own the
>> Filmlab, the ATL is no longer something I think of.
>> I am doing E6 (Tetenal 3-bath), C41 (Tetenal) and mostly BW (Pyrocat HD)
>> in 135 and 120. Everything works perfect. Pyrocat-processing needed some
>> fine-tuning, but now it works like a breeze.
>> The reels are Paterson-Style and much easier to load than their Jobo
>> counterparts.
>>
>> HTH,
>> Michael
>>
>> ========================================================================
> =====================================
>> To unsubscribe from this list, go to www.freelists.org and logon to
> your account (the same e-mail address and password you set-up when you
> subscribed,) and unsubscribe from there.
>>
> ==============================================================================
> ===============================
> To unsubscribe from this list, go to www.freelists.org and logon to your
> account (the same e-mail address and password you set-up when you subscribed,)
> and unsubscribe from there.
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
- Follow-Ups:
- [pure-silver] Welcome to new Subscribers
- From: Richard Knoppow
- References:
- [pure-silver] Re: AW: Re: Teltenal film processor
- From: Laurence Cuffe
Other related posts:
- » [pure-silver] AW: Re: Teltenal film processor
- » [pure-silver] Re: AW: Re: Teltenal film processor
- » [pure-silver] Re: AW: Re: Teltenal film processor
- » [pure-silver] Re: AW: Re: Teltenal film processor
- » [pure-silver] Re: AW: Re: Teltenal film processor
- » [pure-silver] Re: AW: Re: Teltenal film processor
- » [pure-silver] Re: AW: Re: Teltenal film processor
- » [pure-silver] Re: AW: Re: Teltenal film processor
- [pure-silver] Welcome to new Subscribers
- From: Richard Knoppow
- [pure-silver] Re: AW: Re: Teltenal film processor
- From: Laurence Cuffe