[pure-silver] Re: AW: Re: Teltenal film processor

With a review like the one you've given below how could I not buy it!
Thanks for all the help
Larry Cuffe

Michael W. Hilgert wrote:
>This small wonder can do anything as long as it is a 3-bath process.
>Presoak and washing steps do not count into the 3-bath-Process, water is
>taken out of the waterbath.
>Every part of the process is programmable, not in %, but as exact as in
>1-second steps. Each step. Temperature range von 18=B0C to 40=B0C. =
>Rotation
>speed also full adjustable. The processor is fully automated, i.e. after
>having stored the program (9 program-channels) you literally just hit
>start - after some time the machine says "beep" and you take out your
>film.
>For a long time a was dreaming of an autolab (ATL3), but since I own the
>Filmlab, the ATL is no longer something I think of.
>I am doing E6 (Tetenal 3-bath), C41 (Tetenal) and mostly BW (Pyrocat HD)
>in 135 and 120. Everything works perfect. Pyrocat-processing needed some
>fine-tuning, but now it works like a breeze.
>The reels are Paterson-Style and much easier to load than their Jobo
>counterparts.
>
>HTH,
>Michael
>
>========================================================================
=====================================
>To unsubscribe from this list, go to www.freelists.org and logon to 
your account (the same e-mail address and password you set-up when you 
subscribed,) and unsubscribe from there.
>
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: