[pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- From: "BOB KISS" <bobkiss@xxxxxxxxxxxxx>
- To: <pure-silver@xxxxxxxxxxxxx>
- Date: Thu, 29 May 2008 09:38:23 -0400
DEAR JEFF,
Thanks for your info! Knowledge is power.
I have tried Xtol with out liking it. Pyrocat is a very different
animal than Rodinal and I would be surprised, given the nature of the beast
(to murder a metaphor) if it wouldn't have also held the highlight details.
I have used PMK (another pyro dev) and been amazed that the highlights went
on nearly forever without blocking up.
I will try to test the 35mm T-max 100 in Pyrocat HD soon and report
results. No guarantees given my work load. ;-))
CHEERS!
BOB
-----Original Message-----
From: pure-silver-bounce@xxxxxxxxxxxxx
[mailto:pure-silver-bounce@xxxxxxxxxxxxx] On Behalf Of J Howe
Sent: Thursday, May 29, 2008 9:12 AM
To: pure-silver@xxxxxxxxxxxxx
Subject: [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
Hi Bob,
Haven't come across the prints I made but notes say acutance was not
better than Xtol 1:2.
In fact, in testing another group of developers, where the scene was a
1920's school room, painted white except for the floor, partially
sunlit, with a glowing 100w bulb hanging from the ceiling, only Xtol
held the shape of the bulb without letting it "glow out" or exhibit
acutance failure. Haven't found the material from that test (haven't
looked) so I don't remember if Pyrocat was included, but Rodinal 1:100 was.
I've temporarily suspended the quest for the grail of developers. I
think. Well, okay, I've recently been using Instant Mytol.
Hope This Helps,
Jeff
BOB KISS wrote:
> DEAR HTH,
> Did the T-max 100 in Pyrocat at least have good acutance? Or HD
> (high definition) as Sandy calls it? Though it seems there is often a
trade
> off between grain and acutance, can you recommend a high acutance
developer
> that doesn't produce too much grain with T-max 100? I find that, with my
> Leica and Leitz lens that perform VERY well with other film/developer
> combinations, though 35 mm T-max 100 is fine grain and yields fine detail
it
> simply looks soft.
> CHEERS!
> BOB
>
> -----Original Message-----
> From: pure-silver-bounce@xxxxxxxxxxxxx
> [mailto:pure-silver-bounce@xxxxxxxxxxxxx] On Behalf Of J Howe
> Sent: Wednesday, May 28, 2008 5:46 PM
> To: pure-silver@xxxxxxxxxxxxx
> Subject: [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
>
> 1:1:100, 15 min. 72deg. F in a 16 or 32 oz.SS tank. This printed well
> on VC paper with a #2 MG filter so all further were using this time,
> temp., dil. ISO 100.
>
> Agitation for all was 30 sec. initial, 10 sec. every 2 min. thereafter.
> Good negs but grainier than others and no other benefit.
>
> I thought I remember reading that Mr. King developed this formula for
> negs that could be printed in either silver or pt./pd. Again TMX 100
> (the old stuff) 135 & 120
>
> HTH
>
>
> BOB KISS wrote:
>
>> DEAR LIST,
>> Has anyone developed 35 mm T-max 100 film in Pyrocat HD? Please
>> suggest starting times, temps, and effective speeds. Please also let me
>> know what you thought of the results; grain, tonal separation, sharpness?
>> CHEERS!
>> BOB
>>
>> Please check my website: http://www.bobkiss.com/
>>
>> "Live as if you are going to die tomorrow. Learn as if you are going to
>> live forever". Mahatma Gandhi
>>
>>
>>
>>
>
============================================================================
> =================================
> To unsubscribe from this list, go to www.freelists.org and logon to your
> account (the same e-mail address and password you set-up when you
> subscribed,) and unsubscribe from there.
>
> __________ NOD32 3141 (20080528) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
>
============================================================================
=================================
> To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.
>
>
============================================================================
=================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you
subscribed,) and unsubscribe from there.
__________ NOD32 3143 (20080529) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
- References:
- [pure-silver] 35 MM T-MAX 100 IN PYROCAT?
- From: BOB KISS
- [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- From: J Howe
- [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- From: BOB KISS
- [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- From: J Howe
Other related posts:
- » [pure-silver] 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- » [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- [pure-silver] 35 MM T-MAX 100 IN PYROCAT?
- From: BOB KISS
- [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- From: J Howe
- [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- From: BOB KISS
- [pure-silver] Re: 35 MM T-MAX 100 IN PYROCAT?
- From: J Howe