You stop the server by doing a control-c in the terminal the server runs in. You can set the aprs status message by changing my $serverstatus = "to a new value"; in pskmailrc.pl. 73, Rein PA0R > -----Ursprüngliche Nachricht----- > Von: "DAVID GRAY" <kf4wbs@xxxxxxxxxxx> > Gesendet: 02.03.09 16:30:31 > An: <pskmail@xxxxxxxxxxxxx> > Betreff: [pskmail] Re: pskmail server > Thankyou for the information is there a users guide with all the > instructions somewhere I could look at ? > how do I shut down the server without rebooting and how does one notify the > aprs that you are going off line ect. > > David KF4WBS > > -------------------------------------------------- > From: "Rein Couperus" <rein@xxxxxxxxxxxx> > Sent: Monday, March 02, 2009 9:26 AM > To: <pskmail@xxxxxxxxxxxxx> > Subject: [pskmail] Re: pskmail server > > > David, > > > > the program only compiles the pskmailrc.pl file when you run it the first > > time. > > It will remain intact even when you install a new version of the program! > > You can edit it with 'gedit ~/.pskmail/pskmailrc.pl' > > (mind the .dot agn...) > > After editing the pskmailrc.pl file you must restart the program (ctrl-C, > > pskmail_server). > > The config file is read only at restart of the program. > > The frequencies file is read automatically every hour, so you can change > > the > > scanning table without restarting the server... > > > > hope this helps, > > > > Rein PA0R > > > >> -----Ursprüngliche Nachricht----- > >> Von: "DAVID GRAY" <kf4wbs@xxxxxxxxxxx> > >> Gesendet: 02.03.09 14:05:51 > >> An: <pskmail@xxxxxxxxxxxxx> > >> Betreff: [pskmail] Re: pskmail server > > > > > >> I have that problem fixed. I reinstalled the operating system and used > >> the > >> correct coordinates. The problem I see is that when you install the > >> program > >> it compiles the .pl file > >> That means to me if I update the .pl file I must reinstall the program ? > >> I didn't put in the frequencies in the scan list yet so I am thinking I > >> will > >> need to reinstall again to get everything running > >> If you know a shortcut let me know > >> Also as far as ssid goes I didn't use one but when I checked findu.com > >> it > >> appears I have an ssid of -16 > >> I must have found the correct file because the coordinates are correct > >> now > >> > >> David KK4WBS > >> > >> -------------------------------------------------- > >> From: "Rein Couperus" <rein@xxxxxxxxxxxx> > >> Sent: Monday, March 02, 2009 6:09 AM > >> To: <pskmail@xxxxxxxxxxxxx> > >> Subject: [pskmail] Re: pskmail server > >> > >> > David, > >> > > >> > can you send me a copy of your pskmailrc.pl? > >> > There is probably a simple explanation... > >> > > >> > All config data are read from pskmailrc.pl at startup. > >> > As APRS is quite picky about the format it is checked before sending > >> > it. > >> > You can add an SSID to the callsign, which must be in APRS format, > >> > so -0 > >> > to -15 > >> > The running version of psmail.rc is in the .pskmail (mind the dot!) > >> > directory. > >> > That is the version you want to edit. > >> > > >> > 73, > >> > > >> > Rein Pa0R > >> > > >> >> -----Ursprüngliche Nachricht----- > >> >> Von: "DAVID GRAY" <kf4wbs> > >> >> Gesendet: 01.03.09 19:10:36 > >> >> An: <rein@xxxxxxxxxxxx> > >> >> Betreff: pskmail server > >> > > >> > SIR > >> >> > >> >> I HAVE THE SERVER INSTALLED > >> >> > >> >> HOWEVER THE GRID COORDINATES ALWAYS PUT IN THE THE EASTERN HEMISPHERE > >> >> I HAVE PUT XXXXX.XXW FOR MY GRID BUT THE TERMINAL PRINTS > >> >> THERE MAYBE A FORMAT ERROR AND CONNECTS TO THE APRS SERVER AND > >> >> REPORTS MY POSITION THE GRID NUMBERS ARE CORRECT BUT IT COMES OUT > >> >> EAST E INSTEAD OF W > >> >> ALSO IT ADDS AN L TO MY CALLSIGN I HAVE CHECKED THE APRS FINDU BUT > >> >> CANT FIND ME ...... SHOULD IT BE A -L ? > >> >> I TRIED TO RELOAD THE SERVER BUT THE COORDINATES MUST BE STORED IN A > >> >> DIFFERENT LOCATION BECAUSE WHEN I BRING IT BACK UP IT HAS THE SAME > >> >> NUMBERS AND N AND E ALREADY IN THE PL FILE > >> >> > >> >> SHOULD I DELETE THE PL FILE AND REINSTALL THE SERVER ? AND THEN > >> >> REENTER THE NUMBERS OR DO I NEED TO REINSTALL UBUNTU AND START OVER ? > >> >> > >> >> > >> >> DAVID KF4WBS / NNN0LES NAVYMARS > >> > > >> > -- > >> > http://pa0r.blogspirit.com > >> > > >> > > >> > >> > >> > > > > -- > > http://pa0r.blogspirit.com > > > > > > > -- http://pa0r.blogspirit.com