[pskmail] Re: pskmail server
- From: Rein Couperus <rein@xxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Mon, 02 Mar 2009 15:26:55 +0100
David,
the program only compiles the pskmailrc.pl file when you run it the first time.
It will remain intact even when you install a new version of the program!
You can edit it with 'gedit ~/.pskmail/pskmailrc.pl'
(mind the .dot agn...)
After editing the pskmailrc.pl file you must restart the program (ctrl-C,
pskmail_server).
The config file is read only at restart of the program.
The frequencies file is read automatically every hour, so you can change the
scanning table without restarting the server...
hope this helps,
Rein PA0R
> -----Ursprüngliche Nachricht-----
> Von: "DAVID GRAY" <kf4wbs@xxxxxxxxxxx>
> Gesendet: 02.03.09 14:05:51
> An: <pskmail@xxxxxxxxxxxxx>
> Betreff: [pskmail] Re: pskmail server
> I have that problem fixed. I reinstalled the operating system and used the
> correct coordinates. The problem I see is that when you install the program
> it compiles the .pl file
> That means to me if I update the .pl file I must reinstall the program ?
> I didn't put in the frequencies in the scan list yet so I am thinking I will
> need to reinstall again to get everything running
> If you know a shortcut let me know
> Also as far as ssid goes I didn't use one but when I checked findu.com it
> appears I have an ssid of -16
> I must have found the correct file because the coordinates are correct now
>
> David KK4WBS
>
> --------------------------------------------------
> From: "Rein Couperus" <rein@xxxxxxxxxxxx>
> Sent: Monday, March 02, 2009 6:09 AM
> To: <pskmail@xxxxxxxxxxxxx>
> Subject: [pskmail] Re: pskmail server
>
> > David,
> >
> > can you send me a copy of your pskmailrc.pl?
> > There is probably a simple explanation...
> >
> > All config data are read from pskmailrc.pl at startup.
> > As APRS is quite picky about the format it is checked before sending it.
> > You can add an SSID to the callsign, which must be in APRS format, so -0
> > to -15
> > The running version of psmail.rc is in the .pskmail (mind the dot!)
> > directory.
> > That is the version you want to edit.
> >
> > 73,
> >
> > Rein Pa0R
> >
> >> -----Ursprüngliche Nachricht-----
> >> Von: "DAVID GRAY" <kf4wbs>
> >> Gesendet: 01.03.09 19:10:36
> >> An: <rein@xxxxxxxxxxxx>
> >> Betreff: pskmail server
> >
> > SIR
> >>
> >> I HAVE THE SERVER INSTALLED
> >>
> >> HOWEVER THE GRID COORDINATES ALWAYS PUT IN THE THE EASTERN HEMISPHERE
> >> I HAVE PUT XXXXX.XXW FOR MY GRID BUT THE TERMINAL PRINTS
> >> THERE MAYBE A FORMAT ERROR AND CONNECTS TO THE APRS SERVER AND
> >> REPORTS MY POSITION THE GRID NUMBERS ARE CORRECT BUT IT COMES OUT
> >> EAST E INSTEAD OF W
> >> ALSO IT ADDS AN L TO MY CALLSIGN I HAVE CHECKED THE APRS FINDU BUT
> >> CANT FIND ME ...... SHOULD IT BE A -L ?
> >> I TRIED TO RELOAD THE SERVER BUT THE COORDINATES MUST BE STORED IN A
> >> DIFFERENT LOCATION BECAUSE WHEN I BRING IT BACK UP IT HAS THE SAME
> >> NUMBERS AND N AND E ALREADY IN THE PL FILE
> >>
> >> SHOULD I DELETE THE PL FILE AND REINSTALL THE SERVER ? AND THEN
> >> REENTER THE NUMBERS OR DO I NEED TO REINSTALL UBUNTU AND START OVER ?
> >>
> >>
> >> DAVID KF4WBS / NNN0LES NAVYMARS
> >
> > --
> > http://pa0r.blogspirit.com
> >
> >
>
>
>
--
http://pa0r.blogspirit.com
Other related posts:
