That worked as well. Am I correct in thinking that the Offset seconds are being ignored in this version? Roger On 19/04/11 20:56, G6CKR wrote: > That worked. I have clicked it down to 2 for a 21:17 BST beacon. > I have a Hospital trip for a routine Electrocardiogram in the morning so > beacon will be off. I will install the latest version on the TX machine > when I get back home. > So look for beacons on minute 1 or 2 of the block depending on how I feel. > 73 Roger > On 19/04/11 20:34, G6CKR wrote: >> I used the VNC via the LAN and have installed the new version, it has >> read in 4 to the spinner window and I have not touched it.The audio goes >> to the speakers so I will hear it hopefully at 20:49 BST and not before. >> On 19/04/11 20:02, Rein Couperus wrote: >>> I have changed the code in such a way that the beacon minute is now taken >>> directly off the spinner... >>> So WhatYouSeeIsWhatYouGet... whatever is in the config file. >>> Tested here with 10, 30 and 60 minute periods... version 0.9.4-1 >>> >>> Rein PA0R >>> >>>> VNC access should be working with the same details if you want to remote >>>> test. >>>> Not tested via the Mi-Fi Second internet route but the settings on the >>>> new router look right. >>>> Otherwise I await your findigs >>>> Roger >>>> On 19/04/11 19:14, Rein Couperus wrote: >>>>> I think I found it, testing.... >>>>> >>>>> Rein >>>>> >>>>>> On 19/04/11 12:08, G6CKR wrote: >>>>>>> On 19/04/11 10:04, G6CKR wrote: >>>>>>>> On 18/04/11 21:12, G6CKR wrote: >>>>>>>>> perfs say minute 2 window says minute 2. >>>>>>>>> Since 18:15 it has reverted to minute 0. >>>>>>>>> >>>>>>>>> http://aprs.fi/?c=raw&call=G6CKR&limit=50&view=normal >>>>>>>>> has the evidence. >>>>>>>>> 73 Roger >>>>>>>>> >>>>>>>> Restarted Jpskmail and touched nothing the first beacon went on minute >>>>>>>> 0 >>>>>>>> despite showing 2 in the window. I clicked up to 3 and back down to 2 >>>>>>>> and it went again on the 2 (08:17:28 UTC on the raw data) I will leave >>>>>>>> it alone to see if it reverts back to 0 by it's self. >>>>>>>> 73 Roger >>>>>>>> >>>>>>> I see from raw packets that my client has reverted the minute 0 again. >>>>>>> I have not been back into the shack. >>>>>>> Is it refreshing something and reading the default instead of the config >>>>>>> file ?. >>>>>>> Rein I have the dynamic address updating for the domain now so a look >>>>>>> see is possible again. But I will update the second machine later today >>>>>>> and see if it behaves the same way first. >>>>>>> 73 Roger >>>>>>> >>>>>>> >>>>>> removed jpskmail and .pskmail folders from second machine. >>>>>> Used the installer for 9.0.3 but before first run replaced the.jar with >>>>>> 9.0.4 version. >>>>>> filled in basic details and set bcn minute to 2. >>>>>> first beacon correct now reverted to 0 on this machine. >>>>>> I'm stumped. >>>>>> 73 Roger G6CKR >>>>>> >>>>>> >>>>> >>>> >>>> >>> >> >> > >