That worked. I have clicked it down to 2 for a 21:17 BST beacon. I have a Hospital trip for a routine Electrocardiogram in the morning so beacon will be off. I will install the latest version on the TX machine when I get back home. So look for beacons on minute 1 or 2 of the block depending on how I feel. 73 Roger On 19/04/11 20:34, G6CKR wrote: > I used the VNC via the LAN and have installed the new version, it has > read in 4 to the spinner window and I have not touched it.The audio goes > to the speakers so I will hear it hopefully at 20:49 BST and not before. > On 19/04/11 20:02, Rein Couperus wrote: >> I have changed the code in such a way that the beacon minute is now taken >> directly off the spinner... >> So WhatYouSeeIsWhatYouGet... whatever is in the config file. >> Tested here with 10, 30 and 60 minute periods... version 0.9.4-1 >> >> Rein PA0R >> >>> VNC access should be working with the same details if you want to remote >>> test. >>> Not tested via the Mi-Fi Second internet route but the settings on the >>> new router look right. >>> Otherwise I await your findigs >>> Roger >>> On 19/04/11 19:14, Rein Couperus wrote: >>>> I think I found it, testing.... >>>> >>>> Rein >>>> >>>>> On 19/04/11 12:08, G6CKR wrote: >>>>>> On 19/04/11 10:04, G6CKR wrote: >>>>>>> On 18/04/11 21:12, G6CKR wrote: >>>>>>>> perfs say minute 2 window says minute 2. >>>>>>>> Since 18:15 it has reverted to minute 0. >>>>>>>> >>>>>>>> http://aprs.fi/?c=raw&call=G6CKR&limit=50&view=normal >>>>>>>> has the evidence. >>>>>>>> 73 Roger >>>>>>>> >>>>>>> Restarted Jpskmail and touched nothing the first beacon went on minute 0 >>>>>>> despite showing 2 in the window. I clicked up to 3 and back down to 2 >>>>>>> and it went again on the 2 (08:17:28 UTC on the raw data) I will leave >>>>>>> it alone to see if it reverts back to 0 by it's self. >>>>>>> 73 Roger >>>>>>> >>>>>> I see from raw packets that my client has reverted the minute 0 again. >>>>>> I have not been back into the shack. >>>>>> Is it refreshing something and reading the default instead of the config >>>>>> file ?. >>>>>> Rein I have the dynamic address updating for the domain now so a look >>>>>> see is possible again. But I will update the second machine later today >>>>>> and see if it behaves the same way first. >>>>>> 73 Roger >>>>>> >>>>>> >>>>> removed jpskmail and .pskmail folders from second machine. >>>>> Used the installer for 9.0.3 but before first run replaced the.jar with >>>>> 9.0.4 version. >>>>> filled in basic details and set bcn minute to 2. >>>>> first beacon correct now reverted to 0 on this machine. >>>>> I'm stumped. >>>>> 73 Roger G6CKR >>>>> >>>>> >>>> >>> >>> >> > >