Configure->modems->use sweet spot Set the acq search range and the server search ranges to 40 Hz. 73, Rein PA0R > -----Ursprüngliche Nachricht----- > Von: "Hal" <IamW8MCH@xxxxxxxxxxx> > Gesendet: 01.10.08 21:35:16 > An: pskmail@xxxxxxxxxxxxx > Betreff: [pskmail] Re: Unstable Cursor? > On 10-01, Rein Couperus wrote: > > Congrats, you got it working... > > Working; yes. Usable; no.. HI.. I tried Puppy4-psk-1.0.iso and it works > fine in that the sweet spot setting puts the cursor where it _belongs_, > locked on that frequency.. The cursor can't be dragged off that spot.. > > > > > Make sure you have 'use sweet spot' checked in fldigi. You should > > limit the acquisition search range to 40 Hz and the server search range > > also to 40 Hz. > > The waggly cursor is constantly hunting for a psk signal within that band. > > (40 Hz around 100Hz). On TX the frequency is set exactly to the sweet spot. > > Is 'use sweet spot' the same as the box in Misc "Start new Modem > at Sweet Spot?" If so I have that checked and saved.. With my trial > lashup; not Puppy; the cursor can't be set within 40Hz or even a 100Hz, > bouncing as far away as 500, from 1000.. :^(.. I need to be able to lock > it down on the sweet spot setting.. I was hoping there was a flag or > switch to do this.. HI.. > > > > > > > > -----Ursprüngliche Nachricht----- > > > Von: "Hal" <IamW8MCH@xxxxxxxxxxx> > > > Gesendet: 30.09.08 19:42:55 > > > An: pskmail@xxxxxxxxxxxxx > > > Betreff: [pskmail] Unstable Cursor? > > > > > > > > > > Greetings: I have FLDigi3.03, PSKMail1.0 running nice except for one big > > > problem: (Both the fldigi and pskmail executables are in user space if > > > that means anything.) > > > > > > From an Xterm, invoking fldigi <enter> or fldigi & <enter> I get the > > > display with the default sweet point of 1000Hz; so I check the button > > > for that to be the standard.. Turning AFC off and Lck on I tune to > > > 10147000 and wait for the servers sounding/broadcast on the hour or half > > > hour with perfect copy, either psk125 or psk250.. (He broadcasts both, > > > one minute apart).. The cursor stays put on 1000Hz.. So far so good.. > > > > > > Invoking pskmail I get the report "Starting Program" and the PSKMail > > > window on top of the FLDigi window with the waterfall showing.. From > > > then on the red lined cursor starts to move around intermittently with > > > no obvious packets being received.. AFC still off and Lck still on... > > > > > > Killing PSKmail; resetting the cursor to 1000Hz again and it stays put > > > printing the next servers broadcast.. (I don't have PTT hooked up yet > > > and wont until this is solved.) > > > > > > Any suggestions; what to try?? TIA.. > > > > > > -- > -- > > Vy 73 de Hal--W8MCH UNIX-GNU/Linux - Slackware 11.0, 2.4.33.3 > . > > > -- http://pa0r.blogspirit.com