[pskmail] Re: Server Running

Thanks Per. I was wondering how that worked.
Very 73, Glenn

On Wed, May 2, 2012 at 7:21 AM, Pär Crusefalk <per@xxxxxxxxxxxx> wrote:

> Hi,
>
> Just wanted to add that the server will send QSL's on incoming beacons
> until it figures out that the sender is another server. So it should
> stop sending QSL's when it sees a QSL from the other server.
>
> 73, Per
>
> Glenn Roeser Roeser skrev 2012-05-02 11:49:
> > Thanks Robert, I did view your monitor, very nice. Over 24 hours and
> > Fldigi is still running without any problems. I'm using one of those eee
> > mini towers with 1G, so not the fastest or the best. BTW that makes two
> > of us then, because I like watching all the goings on too!
> > Very 73, Glenn
> >
> > On Tue, May 1, 2012 at 10:27 PM, John Douyere <vk2eta@xxxxxxxxx
> > <mailto:vk2eta@xxxxxxxxx>> wrote:
> >
> >     hihi Robert,
> >
> >     Since there are probably a few of us in that category it becomes
> >     "normal"...hihi
> >
> >     73, John
> >
> >     On Wed, May 2, 2012 at 12:16 PM, Robert Krasowski
> >     <rkrasowski@xxxxxxxxx <mailto:rkrasowski@xxxxxxxxx>> wrote:
> >
> >         yep my server QSL yours. Check my monitor at
> >         www.krasowski.net/monitor/ <http://www.krasowski.net/monitor/>,
> >         you can see there all activity including station heard and all
> >         gating you can check all network.
> >         Have fun.....
> >         I love watching my server working while exchanging emails, mode
> >         changes, s/n values etc, a lot of fun.... or maybe, just maybe I
> >         am getting strange ...
> >
> >         73
> >         Robert
> >
> >
> >         --- On *Tue, 5/1/12, Glenn Roeser Roeser /<wb2lmv@xxxxxxxxx
> >         <mailto:wb2lmv@xxxxxxxxx>>/* wrote:
> >
> >
> >             From: Glenn Roeser Roeser <wb2lmv@xxxxxxxxx
> >             <mailto:wb2lmv@xxxxxxxxx>>
> >             Subject: [pskmail] Re: Server Running
> >             To: pskmail@xxxxxxxxxxxxx <mailto:pskmail@xxxxxxxxxxxxx>
> >             Date: Tuesday, May 1, 2012, 9:48 PM
> >
> >
> >             Hello Robert,
> >             Thank you very much for the report. I must say that I see
> >             your beacon almost all the time. Even when the band fades at
> >             midday.
> >             I don't recall seeing any QSLs for my beacon though. It may
> >             because I have something configured wrong? I'm not sure.
> >             There has been a lot of activity on the band today, and I
> >             hope that Pskmail continues to grow. It certainly is a lot
> >             of fun!
> >             Very 73, Glenn WB2LMV
> >
> >
> >             On Tue, May 1, 2012 at 9:09 PM, Robert Krasowski
> >             <rkrasowski@xxxxxxxxx
> >             <http://mc/compose?to=rkrasowski@xxxxxxxxx>> wrote:
> >
> >                 Glenn, I can see your server and I see your doing QSL to
> >                 my beacon, so it is ok both ways great job!
> >                 Robert
> >                 KB2PNM
> >
> >                 --- On *Tue, 5/1/12, Glenn Roeser Roeser
> >                 /<wb2lmv@xxxxxxxxx
> >                 <http://mc/compose?to=wb2lmv@xxxxxxxxx>>/* wrote:
> >
> >
> >                     From: Glenn Roeser Roeser <wb2lmv@xxxxxxxxx
> >                     <http://mc/compose?to=wb2lmv@xxxxxxxxx>>
> >                     Subject: [pskmail] Re: Server Running
> >                     To: pskmail@xxxxxxxxxxxxx
> >                     <http://mc/compose?to=pskmail@xxxxxxxxxxxxx>
> >                     Date: Tuesday, May 1, 2012, 5:42 AM
> >
> >                     Hi John,
> >                     I have my info on the wiki page now, you are a very
> >                     good mentor, I will adjust for the max of 300 baud
> >                     as well, thank you.
> >                     Yes, when Fldigi locked up it was running under
> >                     Windows. So far today it is doing ok, I will keep an
> >                     eye on it. I am amazed at all the things that
> >                     pskmail is capable of doing, I was watching it in
> >                     connect mode yesterday talking to a client,
> fascinating.
> >                     Do the servers talk to each other through
> >                     the Internet in regards to passing data of any sort?
> >                     Very 73, Glenn
> >
> >                     On Mon, Apr 30, 2012 at 11:02 PM, John Douyere
> >                     <vk2eta@xxxxxxxxx
> >                     <http://mc/compose?to=vk2eta@xxxxxxxxx>> wrote:
> >
> >                         Hi Glenn,
> >
> >                         Have a look at the following below and just add
> >                         a line in the North-America servers with your
> >                         details. Plenty of previous examples in there.
> >                         The edit button is at the top / right part of
> >                         the page. Being a wiki it is user editable.
> >
> >                         http://pskmail.wikispaces.com/PSKmailservers
> >
> >                         Also you may want to limit your server to PSK250
> >                         max speed to respect the 300 baud FCC rule and
> >                         set the following variable in the pskmailrc.pl
> >                         <http://pskmailrc.pl> file:
> >
> >                         $NO500=1;
> >
> >                         In another email you mentioned the apparent
> >                         lockup of Fldigi on your server. Was that
> >                         running Fldigi under Windows?
> >
> >
> >                         73, John
> >
> >
> >                         On Tue, May 1, 2012 at 8:53 AM, Glenn Roeser
> >                         Roeser <wb2lmv@xxxxxxxxx
> >                         <http://mc/compose?to=wb2lmv@xxxxxxxxx>> wrote:
> >
> >                             Hi John,
> >                             I am a member of the pskmail wiki, I'm
> >                             logged in, now how do I go about updating
> >                             the server list page?
> >                             Glenn
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Mobile: +46703784299
>
>

Other related posts: