Hello Rein, many thanks for your quick reply and for the 0.7.17 version.I have see the rflinkserver.pl but you have lost the part regarding the qrg traffic.
I have modified it and installed in my server.Now my server is running with rflinkserver.pl that you can see in attach in this mail.
is necessary to insert the new freqs.txt to avoid confusion. see attach.I have added a new variable in pskmailrc.pl at the end to permit to change the default filter bandpass of the radio; 0 is default. see attach
All parts patched are marked. Thanks for your interest. Best 73 Roberto IS0GRB----- Original Message ----- From: "Rein Couperus" <rein@xxxxxxxxxxxx>
To: <pskmail@xxxxxxxxxxxxx> Sent: Thursday, September 11, 2008 12:32 PMSubject: [pskmail] Re: [pskmail] New features "Change MODE (USB/LSB)" in Scanner & QRG Traffic
Hello Roberto, tnx for the patch. I have worked it into the new server code. Can you test if this works?This code contains the new telnet agent. You can use it from the client with the command:
~TELNET host port You can put passwords into a file ~/.pskmail/telnetusers. Format: CALL,host,port,login_name, password,anycommand,...,.... example: PA0R,k1ttt.net,23,PA0R PA0R,db0fhn.efi.fh-nuernberg.de,8023,pa0r,reinpa0rct,c IGATE 73, Rein PA0R
-----Ursprüngliche Nachricht----- Von: "Roberto IS0GRB" <is0grb@xxxxxxxxx> Gesendet: 11.09.08 11:27:57 An: <pskmail@xxxxxxxxxxxxx>Betreff: [pskmail] New features "Change MODE (USB/LSB)" in Scanner & QRG Traffic
HI Rein, i have added a new features in the rflinkserver.pl. Now the server, if the scanning feature is active, is able to change mode (USB/LSB) on the radio; in the previous version i was able to change only the frequency. Also i'm able to change the mode in the QRG TRAFFIC Frequency. I'm using an ICOM IC-706MKIIG and work fine; i think is ok also for otherradio. I used the command "M" of the rigctl to change the mode; the passbandmode is "0". These are the changes in the rflinkserver.pl: *********SCANNER FEATURE MODE ---------------------------- At line 164 added where the scanner file is read: my $rigmodes = $freqhrs[2]; @rigmod = split (",", $rigmodes); ---------------------------- SCHEDULER SECTION At line 1416 after the line (my $outfreq = 0;) added: $rigm = $rigmod[$mins]; Line 1426 modified:$error = `rigctl -m $rigtype -r $rigdevice -s $rigrate $cmd $outfreq M $rigm0` ---------------------------- SUB SCANNER SECTION At line 2438 after the line (my $outfreq = 0;) added: $rigm = $rigmod[$mins]; Line 2458 modified:$error = `rigctl -m $rigtype -r $rigdevice -s $rigrate $cmd $outfreq M $rigm0` --------------------------- Example of format of freqs.txt 10147250,10147250,10147250,10147250,10147250 PSK250,PSK250,PSK250,PSK250,PSK250 LSB,USB,LSB,USB,LSB ------------------------------------------------------------------------------------------------ *********QRG TRAFFIC FEATURE MODE Line 57 modified:my ($ServerCall, $Inputfile, $output, $dbfile, $dbpass, $dbaddress, $relay,$smtptlsuser, $smtptlspass, $smtptlsport, $Max_retries, $Maxidle, $Maxwebpage, $nosession, $commandcall, $Beaconminute, $Aprs_connect,$Aprs_beacon, $Aprs_port, $Aprs_address, @prefixes, $posit_time, $scheduler, @schedule, $rigtype, $rigrate, $rigdevice, $scanner, $qrgfile, $freq_offset,$freq_corrections, @Beaconarray, $traffic_qrg, $traffic_qrg_mode); At line 60 after the line ($traffic_qrg = 0;) added: $traffic_qrg_mode = 0; Line 329/330 modified: $dummy = `rigctl -m $rigtype -r $rigdevice -s $rigrate "F" $traffic_qrg M $traffic_qrg_mode 0`; print "QSY to $traffic_qrg in $traffic_qrg_mode!\n" In the pskmailrc.pl file at line 77 after ($traffic_qrg = 0;) added: $traffic_qrg_mode = 0; (if modified will be for example: $traffic_qrg_mode = LSB ) -------------------------------------------------------------------------------------------------------------------------------------- I have pleasure if you can add this feature in the next server release. I hope to help you to improve the server funcionality. Best 73 Roberto IS0GRB
-- http://pa0r.blogspirit.com __________ Informazione NOD32 3433 (20080910) __________ Questo messaggio è stato controllato dal Sistema Antivirus NOD32 http://www.nod32.it
10147250,10147250,10147250,10147250,10147250 PSK250,PSK250,PSK250,PSK250,PSK250 USB,USB,USB,USB,USB