[pskmail] Re: Questions about the weather and jpskmail
- From: Per Crusefalk <per@xxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Fri, 03 Apr 2009 16:05:27 +0200
Hi Frédéric,
Thanks for the info!
Regarding the requests for grib files vie email its easy to send that
request, either as a proper message during a connected session or as a
simple pskaprs, unconnected, message. See the included screenshot.
Just make sure the server knows who you are, your email settings
uploaded to it, as it will be difficult to set where to send the files
otherwise ;-)
Regarding the sizes its of course wise to limit what is sent. The simple
request on the screenshot resulted in a 1 kB big message. That should
not be a problem. But, if you increase the data then the transfer is
longer and there is an option in the server to limit the sizes sent.
Cant remember the default now but I guess 10 kB ? (Someone will check
and prove me wrong there ;-)).
Also, when requesting this I got a binary file in response. I don't know
if it will work to get that. Did someone test that already?
Perhaps you nee to read the email in compressed mode (READPAQ) ?
73 de Per, sm0rwo
P.s. Interesting sites!
Frédéric bouchet skrev:
> Hello Per and the list
>
> No, I did not get an answer, except you, thank you for the links I'll
> watch it today or tomorrow.
>
> At the same time I continued my research and I found the solution
> sending e-mail with the following structure
>
> _*1 - receive data by mail only 1 time. *_
>
> To = *query@xxxxxxxxxxxx <mailto:query@xxxxxxxxxxxx> *
> Subject = *query for grib* "but the text input does not matter
> Text = "*send gfs: 49N, 44N, 1E, 8E | 0.5,0.5 | 0.3 .. 72 | PRESS, WIND,
> AIRTMP, TCDC, APCP*"
>
> This gives:
>
> * 49N, 44N, 1E, 8E for the minimum and maximum position of the area
> searched.
> * 0.5,0.5 requested the grid I am also testing at 1 ° and 1.5 °.
> * 0.3 .. 72 0, I find the description. 3 is the spacing between two
> values, the next 3 hours and 72 hours is the number requested by 72H.
> * PRESS, WIND, AIRTMP, TCDC, APCP data for pressure, wind,
> cloudiness and precipitation
>
>
> _*2 - subscribe to receive data by mail during X days*_
> (Note I just tested this, if there is a problem I will let you know.
> Finally, if you wish)
>
> To = *query@xxxxxxxxxxxx <mailto:query@xxxxxxxxxxxx> *
> Subject = *query for grib* "but the text input does not matter
> Text = "*sub gfs: 49N, 44N, 1E, 8E | 0.5,0.5 | 0.3 .. 72 | PRESS, WIND,
> AIRTMP, TCDC, APCP day time = X = yy: yy*"
>
> * date = X or X = desired number of days (eg 30 per day = 30 days)
> * time = yy: yy or yy: yy = hours required to receive mail (eg
> time = 18: 00 to receive the mail at 18:00)
>
>
>
> _* 3 - For info here's the grid / file size *_
>
> * 0.5 °, 0.5 ° = 49K
> * 1 °, 1 ° = 25Ko
> * 1.5 °, 1.5 ° = 21Ko
>
>
> Using the weather is not a question of shipping for me, but more a
> concern tourism and especially a concern for my civil security
> (http://www.adrasec42.org http://www.fnrasec.org)
>
> Against by the time I could not run tests on the air I do not consider
> the length of the transmission of mail?
>
> As against a question comes to mind. Is it possible to send such a
> request via Jpskmail.
> Taking into account the GPS position as a center of a square of 100km
> for example?
>
>
> Cheers, and again thank you for the reply.
>
> 73, Fred - F0EED
>
> 2009/4/3 Pär Crusefalk <per@xxxxxxxxxxxx <mailto:per@xxxxxxxxxxxx>>
>
> Hi Fred,
>
> I don't know if you got any answers to this but as far as I know there
> are two ways to receive these. One is to order grib files by email and
> then fetch the data during a connected session. Another is to monitor
> bulletins sent from servers. I know Intermar are good at that and they
> have info here:
>
> http://www.pskmail.de/index.php?PSKmail-Technik:PSKmail-Wetter
>
> (in german but google can translate)
>
> Grib files can by ordered by email from here:
> http://www.globalmarinenet.net/publications/grib.txt
>
> I'm sure there are more ways but those I know
>
> 73 de Per, sm0rwo
>
> ons 2009-04-01 klockan 12:48 +0200 skrev Frédéric bouchet:
> > Hello list,
> >
> > I read somewhere that it was possible to receive weather info via
> > jpskmail and view that it was possible to have compatibility between
> > the data received via jpskmail and software zygrib (http://www.zygrib.
> > org)
> >
> > Are there any way to know a little more, like hours and frequency of
> > transmission of weather reports.
> >
> > I said that at first I just want to make the reception.
> >
> > 73's to all and good day.
> >
> > Fred - F0EED
> >
> >
> > --
> > --------------------------------------------------
> > Frédéric BOUCHET
> > http://f0eed.e3b.org
> > http://www.gesadra.fr
> > http://www.f5kry.org
> > http://www.adrasec42.org
> >
>
> ------------------------------------------------------------------------------------------------------------------------------------
> > Ce message et toutes les pièces jointes sont confidentiels
> > et établis a l'intention exclusive de ses destinataires. Toute
> > utilisation ou diffusion
> > non autorisée est interdite. Tout message électronique est susceptible
> > d'altération.
> > Je décline toute responsabilité au titre de ce message
> > s'il a été altéré, déformé ou falsifié.
> >
> > Si vous n'êtes pas le destinataire final de ce message, merci de le
> > détruire immédiatement
> > et de m'en avertir .
> >
>
> ------------------------------------------------------------------------------------------------------------------------------------
>
>
>
>
>
> --
> --------------------------------------------------
> Frédéric BOUCHET
> http://f0eed.e3b.org
> http://www.gesadra.fr
> http://www.f5kry.org
> http://www.adrasec42.org
> ------------------------------------------------------------------------------------------------------------------------------------
> Ce message et toutes les pièces jointes sont confidentiels
> et établis a l'intention exclusive de ses destinataires. Toute
> utilisation ou diffusion
> non autorisée est interdite. Tout message électronique est susceptible
> d'altération.
> Je décline toute responsabilité au titre de ce message
> s'il a été altéré, déformé ou falsifié.
>
> Si vous n'êtes pas le destinataire final de ce message, merci de le
> détruire immédiatement
> et de m'en avertir .
> ------------------------------------------------------------------------------------------------------------------------------------
Other related posts:
