Thanks REIN. I will try your suggestions and let youknow. greetings Karel 2010/3/22 Rein Couperus <rein@xxxxxxxxxxxx> > Karel, > > The server scans 5 frequencies and modes in 5 minutes. > The config file for that is ~/.pskmail/qrg/freqs.txt (mind the dot before > pskmail...) > On the first line you put the VFO frequencies: > 10147000,10147000,10147000,10147000,18104000, > On the second line the modes: > PSK250,PSK250,PSK250,PSK250,PSK500R, > > The rest of the config is in ~/.pskmail/pskmailrc.pl, which has > to be edited. > The scanner uses hamlib. You have to set the parameters for your rig, > i.e. rig type, serial port, baud rate > See http://sourceforge.net/apps/mediawiki/hamlib/index.php?title=FAQ > If you want the rig to scan frequencies, put > $scanner = 'F'; > for only mode scanning: > $scanner = 'S'; > > The beaconing is controlled with: > @beacons = qw(1 0 0 0 0); > put a 1 for beaconing, and a 0 for no beaconing for every minute out of the > 5 minute cycle. > So all 1's will beacon 5 times on top of the hour... > > The beacon status text is also set in ~/.pskmail/pskmailrc.pl, > as well as the location of the server (see explantion in the file, > the format is specific for APRS...) > > Hope this gets you going... > > 73, > > Rein PA0R