[pskmail] Re: PSKMAIL Server confusion
- From: G6CKR <radio@xxxxxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Tue, 24 May 2011 18:50:42 +0100
You could try clicking tune in fldigi. That will give you control of
when you do it.
Click again to stop TX.
73 roger G6CKR
On 24/05/11 18:45, Eric W. Davenport wrote:
> Hi all,
>
> Thank You all for your responses.
>
> I have monitored all the frequencies and nothing yet.
>
> I am currently sitting at dial 10146 with a sweet spot set at 1000HZ on
> USB.
>
> I will move up to 10147 if I do not hear anything in a few hours.
>
> My Antenna is a Dipole at 90 feet that works very well to all continents
> so I guess I should hear someone.
>
> I am monitoring using PSK500R.
>
> Eric
>
>
>
> On 5/24/2011 1:27 PM, ve7cus@xxxxxxx wrote:
>> Hi Eric,
>>
>> Our server, VE7SUN, beacons on 10148MHz but I don't know if you would
>> be able to hear it down there. I don't think you can use PSK500R in
>> the US, unfortunately, which is what I use and the server does not
>> have TXID on.
>>
>> Darrel, VE7CUS
>> On 2011-05-24, at 8:35 AM, Eric Davenport wrote:
>>
>>> Hello All,
>>>
>>> I have been working on my server and I am a bit confused.
>>>
>>> I thought that since I cannot control this particular radio that I
>>> would stick it on 10147 Dial frequency and see how it worked out.
>>>
>>> I started testing last Friday and and have been monitoring the
>>> frequency to make sure that I have it set up.
>>>
>>> So far I have not heard a single beacon, so thinking I had my dial
>>> frequency (I have seen many different post and websites that show
>>> differences in the frequencies ) I have monitored 10146 and 10148 as
>>> well. I have not heard any beacons at all.
>>>
>>> I have fldigi setup according to the web site and I can copy other
>>> types of digital signals.
>>>
>>> I have had my Op Mode set to PSK-500R since I read that beacons were
>>> sent in that mode and I have RXID enabled.
>>>
>>> The Interface is a SignalLink the operating system is MINT on VMware
>>> ESXi.
>>>
>>> I know that when I did this a couple of years ago I could see beacons
>>> and since conditions are better I should be able to see more.
>>>
>>> The question is: Are there any servers beaconing on 30 meters?
>>>
>>> 73
>>>
>>> Eric
>>>
>>> --
>>> KZ5ED
>>> Eric
>>> ewdavenport@xxxxxxxxxx
>>>
>>>
>>
>>
>
>
Other related posts:
