I will give openvpn a try. Thanks Kyle. Darrel On 2011-08-21, at 2:58 PM, Kyle Kienapfel wrote: > > > On Sun, Aug 21, 2011 at 2:01 PM, <ve7cus@xxxxxxx> wrote: > The server is behind a router to which I have no control. Is there a way to > access the server computer through it? > > Darrel > > On 2011-08-21, at 1:27 PM, Rein Couperus wrote: > >> No vnc connection? >> It is easy to install Xtightvnc and run fldigi and the server on e.g. >> display :10 >> This is unvaluable when you want to debug something... >> * Install Xtightvnc >> * 'vncserver :10' >> then you can start, monitor and stop the programs from home: >> vncviewer <address>:10 >> >> Rein >> >> -- >> http://pa0r.blogspirit.com >> >> Von: ve7cus@xxxxxxx >> Gesendet: Aug 21, 2011 10:12:37 PM >> An: pskmail@xxxxxxxxxxxxx >> Betreff: [pskmail] Re: No Connection >> >> There is absolutely no response from the server. I might go get to the >> server and bring it here. >> >> Darrel >> >> On 2011-08-21, at 12:51 PM, Rein Couperus wrote: >> >> Hmmm ... a bit difficult to debug, as it is working perfectly here... >> Does the server say anything? >> >> Rein >> >> >> -- >> http://pa0r.blogspirit.com >> >> Von: ve7cus@xxxxxxx >> Gesendet: Aug 21, 2011 9:26:00 PM >> An: pskmail@xxxxxxxxxxxxx >> Betreff: [pskmail] Re: No Connection >> >> Actually, I have tried several modes mainly PSK500R with the same results. I >> also added PSK250 to the table and still it's a no go. >> >> >> Darrel >> >> On 2011-08-21, at 12:16 PM, Rein Couperus wrote: >> >> After some analysis I see that you are using a mode (PSK250) which is not in >> the >> default mode table. >> You could change the mode table to: >> PSK250-PSK250R-PSK125R-THOR22-THOR11 >> and try again... this is one of the combinations I have succesfully tested... >> >> Rein PA0R