Klaus, Thanks, it makes me feel better that it´s not only my unit that is doing this. 73, Gunnar _____ From: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] On Behalf Of Klaus Lohmann Sent: Wednesday, September 14, 2011 12:58 PM To: pskmail@xxxxxxxxxxxxx Subject: [pskmail] Re: New question Gunnar, I experienced the same. Also scanning together with an AT-7000 Tuner doesn't work reliably. Have the server now running on 10147 without any problems. A reason for the problems may be the combination of IC-7200 and AT-7000 and the server using both rigctl and fldigi for rig control. I'm not shure if this really works under all circumstances. I would like to contribute more to the project and started to investigate, but customer demands, they still come :-( , have priority. I think, the timeout messages of rigctl are not a problem, but of course they should not appear. 73, Klaus Am 14.09.2011 12:27, schrieb Gunnar Bulukin: Hi, Rein did some changes to the server when using IC-7200. I used those for a while but my rig hung. Going back to using Rig-cat it works with no problems but I get some error messages in the event log. Everything seems to work anyway!? Is there something I can change? 73 de Gunnar