[pskmail] Re: New client installers released
- From: Klaus Lohmann <dl4oah@xxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Wed, 09 Jan 2013 13:46:28 +0100
Andrew,
these problems with rigcontrol and client 2 are known. I'm working on
it, but don't expect results before end of january.
73, Klaus
Am 09.01.2013 11:55, schrieb Andrew O'Brien:
2.0.24 appears to be working OK except for a couple of things relating
to rig control.
1. Despite setting up rig control for my TS2000 , and saving my
settings, the settings are not saved when I re-boot the software. The
rig is not saved, the baud rate is not saved, the CAT control port is
not saved BUT the PTT port IS saved.
2. Despite carefully selecting the TS-2000 , baud rate that matches
my rig's settings , and a CAT port that matches the virtual serial
ports created by my Microkeyer interface software (setting that work
with other software) , I am unable to achieve PTT or CAT . Scan does
not start.
Andy K3UK
On Wed, Jan 9, 2013 at 5:12 AM, Pär Crusefalk <per@xxxxxxxxxxxx
<mailto:per@xxxxxxxxxxxx>> wrote:
Hi all,
I have uploaded new installers for jpskmail 2.0.24 and 1.5.11.
Version two is the version where the modem is integrated and
version 1.5.11 is a stable release that requires fldigi (3.21.65
should be fine).
At the moment these installers can be found here:
http://www.crusefalk.se/jpskmailinstall/
Test reports are most welcome.
73, Per
sm0rwo
Other related posts:
