Good evening, does anyone use the 7200 as a client,under Linux or/and windows?? An OM has lent me one and I could not get it to work with fldigi (Windows) In advance Thank you Fred F4EED -----Message d'origine----- De : pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] De la part de Rein Couperus Envoyé : lundi 9 mai 2011 17:10 À : pskmail@xxxxxxxxxxxxx Objet : [pskmail] New Icom 7200 @ PI4TUE I have installed a new IC-7200 at the pskmail server @ PI4TUE. The 7200 seems like an excellent rig for use as a server. Only connection needed between the computer and the rig is a USB cable. The sound card is a pretty simple device inside the IC-7200. There are no controls, so you cannot do anything wrong even if you wanted to... The audio levels for the soundcard are fixed, only the modulation output can be changed (USB level). The 7200 has an IF DSP filter centered on 1500 Hz. Frequency control is via the same USB cable (/dev/ttyUSB0). I have included a PTT command in the new server image (1.0.43, in alpha), which neatly switches the TX on and off at the right times. To activate PTT control via hamlib, add a parameter to the pskmailrc.pl config: $PTTCOMMAND = 1; This should also work on some other rigs which are supported by hamlib. Neat stuff.... 73, Rein PA0R -- http://pa0r.blogspirit.com