Hi Karel, I use an IC706MK2G and I use it in memory mode. I do that to be able to use the narrow cw filter on receive. For instance I have 10147 set in memory like 10147 CW on one VFO and 10146.1 USB on the other (with split). I use 900 Hz BFO and center frequency in fldigi. But, I guess you can start just as well with USB only and have the wide filter. I have pskmailrc.pl set like: ######################################################################### # rig control (scheduler, scanner) $scheduler = 0; $rigtype = 311; $rigrate = 19200; $rigdevice = "/dev/ttyUSB0"; $rigptttune = 1; # If 1 then ICOM "PTT TUNE" is in use ########################## $scanner = "M"; $qrgfile = "$ENV{HOME}/.pskmail/qrg/freqs.txt"; $freq_offset = 0;# minutes after '0' @freq_corrections = qw (0 0 0 0 0); # trx frequency correction $traffic_qrg = "M10"; And then qrg/freqs.txt is like: 2,6,15,15,17 PSK500R,PSK500R,PSK500R,PSK500R,PSK500R So, its one frequency/memory for minute 0-4 and one mode per timeslot. I noticed you had frequencies and modes for 6 slots in your file and you need to remove one (should only be min 0-4). Hope that helps! 73 de Per, sm0rwo tis 2010-03-16 klockan 13:08 -0500 skrev karel Fassotte: > Sven, I use a IC706MK2G like you, could you send me the config you use > to get the set scanning. > Thks > Karel > 2010/3/16 karel Fassotte <karel.fassotte@xxxxxxxxx> > Hello I installed puppy mailserver to the harddisk. This may > be a separate hd but may be also a windows partition. Al > stable no serious problems > > Rein, Sven, I have a question. starting the server, editing > first the pskmailrc.pl and freq.txt > (see attachments) the server responds telling the mode, all > but the PSK500 and THOR, is not in the list! How can I edit > them in the list, in what list? > > How can I let the server scan on several frequencies? . I > edited the frequency list, but dont know how to add and where > to add the skedule. > > I am testing the server on air and would be interested to know > who can recieve the mailserver on 10147, plus 1k. The service > is primary directed to NVIS local work, but.. > I use 50 watts in a dipole, fed fed from the 6th floor (25 > meters) down to 15 meters with a symetric open wire ladder > line and antenna tuner. > greetings > Karel > > > >