[pskmail] Re: Connecting to a server?
- From: "John Douyere" <vk2eta@xxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Mon, 14 Jul 2008 09:32:14 +1000
Hi Rob,
Sorry if I state the obvious, but two things that got me a couple of times
are the frequency offset (e.g dial of 10,147 (mode is USB, audio 1Khz) for
center frequency of 10,148, and psk mode (PSK250 instead of PSK125 ) for
example.
But if you are monitoring the screen of the server over the internet, then
you can simply use fldigi by itself and adjust the various parameters until
you see what you type. I am not sure what is the refresh rate of the
internet page though.
Good luck.
73s John
On 7/14/08, Rob Frohne <frohro@xxxxxxxxxxxxxx> wrote:
>
> Hi Again,
>
> I went to the Wiki and edited the client instructions with my
> understanding of how it should be done under the heading "Getting
> Started." Since it isn't working for me yet, someone needs to read them
> and verify that I have everything correct. Since it isn't working,
> there is very likely something critical is missing.
>
> We need some similar edits on the server side. I don't think the server
> is changing frequencies, etc. properly for me for some reason. Any tips
> are very appreciated.
>
> I would like to make my server so that anyone could connect to it while
> I'm gone. It should have a pretty good signal. I have a dipole at 100
> feet and a 4 element 20 meter monobander as well. How do I do this?
>
> 73,
>
> Rob, KL7NA
>
> On Sun, 2008-07-13 at 15:19 -0700, Rob Frohne wrote:
> > Hi Gentlemen:
> >
> > I'm attempting to connect to WB5CON, but either I can't be heard, or I'm
> > doing something wrong or I can't be heard. Do I need to get added to a
> > list of allowed stations so I can connect or what? I'm getting ready to
> > go out on a trip across the US, and I'd like to test PSKMail along the
> > way. I am attempting to set up my home station as a server and also to
> > connect to other's servers. At the moment I am waiting for a CAT cable
> > so that the computer can tell my mobile rig when to transmit, so I
> > thought I would try the base station, but nothing gets connected. Any
> > help would be appreciated. I'm transmitting on 10.148 MHz the following
> > phrase to connect:
> >
> > 00c:1024 KL7NA-1:24 4DCDE
> >
> > I see the web page for WB5CON, but I don't see myself being heard.
> > Maybe it is just propagation.
> >
> >
> > Thanks & 73,
> >
> > Rob, KL7NA (in Walla Walla, WA)
> >
> > Rob
> >
> >
>
>
>
Other related posts:
