[pskmail] Re: Bug latest alpha client?

Which is a real problem actually.
We had varying versions of yes/YES and no/NO for setting aprsserver and
gps enabled or not. Had very interesting results at SA6BQZ with that.
In the config class I have now placed enums for everything, keys and
values. I am starting to replace all hardcoded strings with these enums
but it will take a while. In the meantime I suggest we keep config keys
upper case (CALL) and values lower case (yes).
If we use these enums I am convinced we will save ourselves a lot of
trouble later on.

Its working fine here now and if I hear that its also working for sa6bqz
then I think its time to refresh that alpha.

73 de Per, sm0rwo


mån 2011-04-25 klockan 15:04 +0200 skrev Rein Couperus:
> Changed yes to YES in save enable aprs serverport...
> 
> Any more?
> 
> Rein
> 
> >Loaded and running.
> >Waiting on first beacon going out.
> >2 items to report
> >It is not possible to get a tick to show in the APRS server box.
> >Also the OK save and the click save are interacting.
> >If you click rig control and OK the tick in the box is there when you
> >open edit again.
> >If you click save and then open edit the tick has gone.
> >73 Roger
> >
> >
> >On 25/04/11 08:20, Rein Couperus wrote:
> >> Alpha image uploaded.
> >>
> >> Rein
> >>
> >>> Found it. Works here now, I'll send you a new jar right away. Will
> >>> upload a new installer asap.
> >>>
> >>> /Per
> >>>
> >>> sön 2011-04-24 klockan 21:48 +0200 skrev Pär Crusefalk:
> >>>> Hola,
> >>>>
> >>>> Yes, I see issues with save of configuration from the preferences. For
> >>>> instance editing server does not work now either. I will try to go
> >>>> through the entire thing tomorrow and create a better alpha.
> >>>> Will spend most of the day under my boat so I hope I can do this
> >>>> tomorrow evening.
> >>>>
> >>>> When you search for ports the system checks for working ports and will
> >>>> then get a hold on them and that means rts will be triggered.
> >>>> If you have hardware ptt then that will trigger a tx. System works that
> >>>> way so its a known behaviour. Just double click the TX switch in fldigi
> >>>> to stop it. If you had CAT controlling TX then it would not transmit.
> >>>> Not much we can do about this, at least when the configuration file is
> >>>> nicely saved and done you wont have to touch it.
> >>>>
> >>>> 73 de Per
> >>>> sm0rwo
> >>>>
> >>>>
> >>>>
> >>>> sön 2011-04-24 klockan 20:08 +0200 skrev Gunnar Bulukin:
> >>>>> Hi,
> >>>>>
> >>>>> I connected an GPS to my client, latest alpha.
> >>>>> When I, under devices, have selected port data from the GPS comes in
> >>>>> and when I save it it stops. Going back to devices again its empty.
> >>>>> When I try too search for ports the tx on the rig goes on and I have
> >>>>> to stop pskmail and fldigi to disable the tx.
> >>>>> Probably I am doing something wrong, again!!
> >>>>>
> >>>>> 73 de SA6BQZ Gunnar
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>
> >
> >
>

Other related posts: