Fred, it my understanding we can't use BPSK500 in the states below 10M, maybe someone and add some light on this matter, Hope someone will add a way to switch it off/on in the server. Russell NC5O 1- Whoever said nothing is impossible never tried slamming a revolving door! 2- A government big enough to give you everything you want, is strong enough to take everything you have. - Thomas Jefferson " IN GOD WE TRUST " Russell Blair (NC5O) Skype-Russell.Blair Hell Field #300 DRCC #55 30m Dig-group #693 ----- Original Message ---- From: Fred Reiselt <freiselt@xxxxxxxxxxxxx> To: pskmail@xxxxxxxxxxxxx Sent: Thu, December 10, 2009 11:53:42 AM Subject: [pskmail] Re: BPSK-500 mode in U.S. That is a problem. BPSK-500 should not be used on 30 meters in the US. I have been turning RxID off in fldigi to prevent the speed switching. It gets turned back on, I guess by pskmail_server. Is there a way to disable the server speed switching, or a table that lists available modes, somewhat like the freq.txt used for minutes 0-4? Then BPSK-500 could be excluded from the table. 73, Fred WB5CON PS - I just switched the server back to BPSK250 and turned RxID off again. Russell Blair wrote: > I connected to WB5CON on BPSK250 to update the server he it switched to > BPSK500 from BPSK250 ...can we use BPSK500 in the States below 10M ?. > I checked my setting and I didnt send any RISD out not even on BPSK250. > However I did try to switch the server back to BPSK250 by sending RISD on > BPSK250 and it did not work, at this time WB5CON is on BPSK500. > > Russell NC5O > 1- Whoever said nothing is impossible never tried slamming a revolving door! > 2- A government big enough to give you everything you want, is strong enough > to take everything you have. - Thomas Jefferson > > " IN GOD WE TRUST " > > Russell Blair (NC5O) > Skype-Russell.Blair > Hell Field #300 > DRCC #55 > 30m Dig-group #693 > > > >