I use my FT897 with VOX, it works perfectly... the FT897 even has
a VOX sensitivity control for the DATA port...
Gesendet: Samstag, 14. April 2012 um 19:18 Uhr
Von: "Franco Spinelli" <frspin@xxxxxxxxx>
An: pskmail@xxxxxxxxxxxxx
Betreff: [pskmail] Jpskmail 2.0.9
I have some problem in testing new version of Jpskmail
I have a Ft-897D so I open Preferences-> Edit-> Rig and set:
-Use rigctl
-Rig model 123 - FT-897
-Offset 1000
-Speed 38400
-Port /dev/ttyS0 (or, on netbook, /dev/ttyUSB0)
-PTT via Rigctl
After this I push OK and Preferences-> Save
All preferences are saved except for Rig Port. This value is saved as "None"
If I manually edit config file and add correct port, this is overriden
with "None" at next run.
Without PTT rig control I can't do any test.
Regards
Franco Spinelli
IW2DHW
