[pskmail] Re: Aprs servers and the no beacon issue
- From: Rein Couperus <rein@xxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Thu, 12 Nov 2009 14:04:53 +0100
I guess port 2023 on ahubswe would also work, as it passes the complete
stream...
Rein
> -----Ursprüngliche Nachricht-----
> Von: "Per Crusefalk" <per@xxxxxxxxxxxx>
> Gesendet: 12.11.09 11:58:02
> An: pskmail@xxxxxxxxxxxxx
> Betreff: [pskmail] Re: Aprs servers and the no beacon issue
> My bad, the issues are not related.
> Netherlands aprs server still replies to port 1314 without code change
> so I'm using that for now.
>
> 73 de Per
>
>
> tor 2009-11-12 klockan 11:40 +0100 skrev Rein Couperus:
> > To enable the radio beacon in server 0.9.23 set $nosession = "none"; in
> > pskmailrc.pl.
> > The @Beaconarray = (1 0 0 0 1); sets the minutes (0, 1 2 3 4) you want the
> > beacon to go out.
> >
> > For port 14580 (filter) on aprs tier2 servers, you can set a filter for
> > packet types. To filter
> > message and position packets as used by pskmail aprs, you can set the
> > filter to 'filter t/pm".
> >
> > look at arq.pm line 479:
> > print $handle_out "user $ServerCall pass $passw vers
> > $Version filter t/pm\n";
> >
> > The use of the filter is explained on:
> > http://www.aprs-is.net/javAPRSFilter.aspx
> >
> > Normally the use of port 1314 (message port) is o.k., and needs no extra
> > filter.
> >
> > 73,
> >
> > Rein PA0R
> >
> > PS: I will change this in the next server version.
> >
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: "Per Crusefalk" <per@xxxxxxxxxxxx>
> > > Gesendet: 12.11.09 09:37:01
> > > An: pskmail@xxxxxxxxxxxxx
> > > Betreff: [pskmail] Aprs servers and the no beacon issue
> >
> >
> > > Hi all,
> > >
> > > Just updated to 0.9.23 and connected that to ahubswe as usual.
> > > I had a "no connection" message there and the server would not beacon.
> > > I tried connecting xastir and got a similar problem (could not connect)
> > > and I started to look into it. It seems the procedure when connecting to
> > > aprs servers is changing, for ahubswe you have to connect to port 14580
> > > (only answers that port) and give it a filter. For xastir I use a range
> > > filter. Anyway, connecting the pskmail server to netherlands aprs server
> > > port 1314 worked and I got beacons again. I guess its an issue we may
> > > have to look into, if they change all the servers then we have to follow
> > > that new routine.
> > >
> > > 73 de Per, sm0rwo
> > >
> > >
> > >
> > >
> >
>
>
>
>
--
http://pa0r.blogspirit.com
Other related posts:
