Thanks for your respond David! I just noticed that it works in aprs.fi if I only chance my callsign in andpskmail from OH6ECF/P to OH6ECF-7 Tarmo 2013/3/8 DAVID GRAY <kf4wbs@xxxxxxxxxxx> > ** > I AM NOT SURE BUT IT DOESN’T LOOK LIKE YOU HAVE AN OBJECT ICON IN THE > STRING ? LIKE A HOUSE OR CAR > > *From:* Tarmo Huttunen <tarmopaha@xxxxxxxxx> > *Sent:* Thursday, March 07, 2013 15:36 > *To:* pskmail@xxxxxxxxxxxxx > *Subject:* [pskmail] APRS igate? > > I wonder if I have misunderstand something... > > Igate tab in client jpskmail 1.5.8 says "connected to finland.aprs2.net" > and in the igate data window I see for example: > > 21:16 - OH6ECF/P>PSKAPR,TCPIP*:6232.61N/02720.06E.000/000/ > > Now, should I be able to see location of OH6ECF/P (myself:) over internet > with browser, for example in aprs.fi? Because I can not. (But mapping > works locally in xastir) > Also jpskmail/xastir do receive and show stations from igate (they appear > on the xastir map). > > I use andpskmail on local mobile, send location on 10m band to home. > > BTW John, VK2ETA thanks for AndPskmail! I modified code a little for local > purposes, now it sends position beacons like every 3 or 5 minutes. You > asked comments on this mailing lists so: > -It works fine! No crashes. I use android 2.2 with bluetooth connection > and cheap zte-blade whithout sim. > -somekind of pre-tone before tx would be good with vox. Some rigs start > transmitting slowly and txid wont work. My ugly solution:I just doubled > txid-lines on aprs-beacon code... so it sents id twice. > > Tarmo OH6ECF > > > > > > > > > > >