Victor, normal start sequence: 1. fldigi 2. jpskmail normal stop sequence: 1. jpskmail 2. fldigi You can monitor the frequency running fldigi only.... On jpskmail 1.0 (to be released in the next days) you can click on the 'listening' indicator to start monitoring. The monitor shows all undamaged packets on the terminal screen... Default mode is PSK500R. 73, Rein PA0R ============================== Hello Rein, Thanks for the reply, I think the radio QSY is correct, working on the dial being 10.146 and 1k tone making RF QSY 10.147, and I checked it's USB, that has caught me out before ;-) , I have just upgraded to the latest jpskmail 0.9.3 and fldigi 3.21.11, it has been running on receive only for a few hours with no decode, so since your email I decided to close the programs down and re start them, I closed fldigi, then Jpskmail, when Jpskmail closed, my W7 PC crashed !, so I do not know what program killed it, other than tightvnc there are no other programs running, I think I need to do some more experimentation. I will try running each program individually for a few hours and see if I can make it happen again. Is there a recommendation as to what should be closed down first?, maybe I closed down in a different order this time. As I am currently remotely controlling the PC, I did not see any information that may have been available when it failed, I will investigate further when I am next to the PC, I can not restore the connectivity now. Thanks for all your help. Regards Vic > Date: Wed, 29 Jun 2011 14:19:33 +0200 > From: rein@xxxxxxxxxxxx > To: pskmail@xxxxxxxxxxxxx > Subject: [pskmail] Re: 30m servers? > > Are you sure you are on the right frequency Victor? > These are the beacons PA0R heard since starting the client this morning: > > 10:43 - DL5MCQ>PSKAPR,TCPIP*:!4844.93N/01127.02E-000/000/testing v1.0- RC3 - > 10:44 - DL5MCQ>PSKAPR,TCPIP*:!4844.93N/01127.02E-000/000/testing v1.0- RC3 - > 10:45 - DL5MCQ>PSKAPR,TCPIP*:!4844.93N/01127.02E-000/000/testing v1.0- RC3 - > 11:00 - 9A1CRA>PSKAPR,TCPIP*:!4600.13NP01632.80E& > 11:01 - SM0RWO>PSKAPR,TCPIP*:!5901.16NP01756.10E& > 11:02 - IS0GRB-3>PSKAPR,TCPIP*:!3914.79NP00910.96E& > 11:30 - 9A1CRA>PSKAPR,TCPIP*:!4600.13NP01632.80E& > 12:00 - 9A1CRA>PSKAPR,TCPIP*:!4600.13NP01632.80E& > 12:01 - SM0RWO>PSKAPR,TCPIP*:!5901.16NP01756.10E& > 12:30 - 9A1CRA>PSKAPR,TCPIP*:!4600.13NP01632.80E& > 13:01 - SM0RWO>PSKAPR,TCPIP*:!5901.16NP01756.10E& > 13:02 - IS0GRB-3>PSKAPR,TCPIP*:!3914.79NP00910.96E& > 13:27 - F5YD>PSKAPR,TCPIP*:!0000.00N/00000.00EY000/000/jpskmail 0.8.6 > 13:27 - F5YD>PSKAPR,TCPIP*:!0000.00N/00000.00EY000/000/jpskmail 0.8.6 > 13:36 - F5YD>PSKAPR,TCPIP*:!0000.00N/00000.00EY000/000/jpskmail 0.8.6 > 13:43 - DL4OAH-5>PSKAPR,TCPIP*:!5616.51N/01028.63EY031/000/SY Bilbo anchoring > 13:46 - DL4OAH-5>PSKAPR,TCPIP*:!5616.51N/01028.63EY031/000/SY Bilbo anchoring > 14:00 - 9A1CRA>PSKAPR,TCPIP*:!4600.13NP01632.80E& > 14:01 - SM0RWO>PSKAPR,TCPIP*:!5901.16NP01756.10E& > 14:02 - IS0GRB-3>PSKAPR,TCPIP*:!3914.79NP00910.96E& > > This is on 10147.00 (10146.00 VFO + 1000 Hz, USB). Time is local time ( hour > behind yours). > SM0RWO and IS0GRB-3 could hear my 200 mW beacon on saturday, from a mobile > QTH.... > > Rein PA0R > > =========================================================== > Hi, > > I just had a listen on 10.147 but there was nothing to be heard and no > response to a ping with 60W, hust wondered if this was due to the holiday > season or just propogation? > > Maybe I will try other servers on 40m etc. > > thanks for any information > > Vic > > G0RAS > > > >