Hi Glenn, I have tried to write some detailed instructions regarding how to do the installation. They are at the bottom of my very ugly download page now. http://www.crusefalk.se/jpskmailinstall/ I hope they will get you going. 73 de Per, sm0rwo On Thu, 21 Jun 2012 17:43:48 -0400 Glenn Roeser <wb2lmv@xxxxxxxxx> wrote: > I don't know...the Lubuntu is on Per's and Rein's machines and the Ubuntu > 10.04 is on Gunnar's machine. My pc has only had the Ubuntu 12.04 on it and > I have never changed anything or tried anything other than the 12.04 > > On Thu, Jun 21, 2012 at 5:21 PM, DAVID GRAY <kf4wbs@xxxxxxxxxxx> wrote: > > > ** > > WERE THE LUBUNTU AND U 10.04 IDENTICAL MACHINES ?? SOUNDCARDS ECT TO THE > > 12.04 ? > > > > DAVID > > > > *From:* Glenn Roeser <wb2lmv@xxxxxxxxx> > > *Sent:* Thursday, June 21, 2012 16:16 > > *To:* pskmail@xxxxxxxxxxxxx > > *Subject:* [pskmail] Re: 1.5.10 > > > > Hello David, > > The Ubuntu 12.04 was the first and only Linux os ever on this pc. > > On Jun 21, 2012 4:58 PM, "DAVID GRAY" <kf4wbs@xxxxxxxxxxx> wrote: > > > >> ** > >> GLEN > >> > >> DID YOU WIPE THE HARD DRIVE WHEN YOU INSTALLED 10.04 OVER 12.04 ? 0R > >> LUBUNTU ? > >> > >> DAVID > >> > >> *From:* Glenn Roeser <wb2lmv@xxxxxxxxx> > >> *Sent:* Thursday, June 21, 2012 15:27 > >> *To:* pskmail@xxxxxxxxxxxxx > >> *Subject:* [pskmail] Re: 1.5.10 > >> > >> I am starting to believe that the Ubuntu 12.04 is the problem. The 10.04 > >> works and so does everything under *L*ubuntu 12.04. > >> > >> On Thu, Jun 21, 2012 at 3:28 PM, Gunnar Bulukin <gunnar@xxxxxxxxxx>wrote: > >> > >>> ** > >>> Try and download it once again I just installed it on my boat (Ubuntu > >>> 10.04) with no problems! > >>> //gunnar > >>> > >>> ------------------------------ > >>> *From:* pskmail-bounce@xxxxxxxxxxxxx [mailto: > >>> pskmail-bounce@xxxxxxxxxxxxx] *On Behalf Of *Glenn Roeser > >>> *Sent:* Thursday, June 21, 2012 9:20 PM > >>> *To:* pskmail@xxxxxxxxxxxxx > >>> *Subject:* [pskmail] 1.5.10 > >>> > >>> Per, > >>> I cannot get the 1.5.10 installer to open on Linux 12.04, I have the > >>> permission set as an executable but it will not open. Any ideas? > >>> Very 73, Glenn > >>> > >> > >> -- Per Crusefalk <per@xxxxxxxxxxxx>