Re: using breadboards
- From: "Tyler Littlefield" <tyler@xxxxxxxxxxxxx>
- To: <programmingblind@xxxxxxxxxxxxx>
- Date: Sun, 22 Feb 2009 17:39:10 -0700
lol. that's awesome. I'll see if I can find out about a project that needs
help, and I'll get going with it. :)
----- Original Message -----
From: Ken Perry
To: programmingblind@xxxxxxxxxxxxx
Sent: Sunday, February 22, 2009 5:34 PM
Subject: RE: using breadboards
You just register and svn the source and your off and running.
KenThey don't care if your 9 or 200 its open source.
From: programmingblind-bounce@xxxxxxxxxxxxx
[mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of Tyler Littlefield
Sent: Sunday, February 22, 2009 7:25 PM
To: programmingblind@xxxxxxxxxxxxx
Subject: Re: using breadboards
I've thought about that, but I'm not really sure that I have the expertees
and time to get involved with something like that.
I am not even sure how to begin getting on the dev team.
My doubts are pretty high on them just letting some 18 year old blind dude
still in high school code. :)
I know I have a lot to learn, I'm just trying to find out the best way to
learn it.
I'm not even picky about what it is, well to a point, anyway.
----- Original Message -----
From: Ken Perry
To: programmingblind@xxxxxxxxxxxxx
Sent: Sunday, February 22, 2009 4:57 PM
Subject: RE: using breadboards
I think you again are barking up the wrong tree. So you write your own
shell. (I have done this ) What then? To make it useful you need
applications for it. You will have to write them all. You would be better off
getting involved in something like the Google Android operating system or OE
Linux at the ground level. If you do something like that you're in on the low
level of both devices and software and you can make a large difference. The
Android operating system is made for all mobile devices so you could both start
from scratch and get the support of a community. The problem is in the past a
lot of blind or disability companies have created things from scratch and when
you are all done you end up with a device that is so behind the times no one
wants to use it. Same goes for software you will spend more time making your
shell interact with things that are out there because your users will want to
chat with his friend on Msn or print her papers to that usb printer. So look
more into getting involved with things like OE Linux or Android or things of
that sort and you will learn the same amount your thinking of while making a
huge difference.
Ken
From: programmingblind-bounce@xxxxxxxxxxxxx
[mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of Tyler Littlefield
Sent: Sunday, February 22, 2009 5:40 PM
To: programmingblind@xxxxxxxxxxxxx
Subject: Re: using breadboards
I graduate this may, I believe.
Maybe I won't go that route. I'm interested in OS design, making something
work.
I really want to just write a basic shell, though I doubt my OS will be the
next windows on the market, I want to get things working.
I started playing with something, but after I got it to boot up and
everything I wasn't able to find a way to test what I wanted to see if it works.
Basically I'm looking for another solution besides just windows and linux
dev. I want to start playing with new technologies learning how things work,
making things go bang, etc.
Any other ideas would be great. I won't give up on learning about
circuitry, but it's hardly a career option for me.
----- Original Message -----
From: Ken Perry
To: programmingblind@xxxxxxxxxxxxx
Sent: Sunday, February 22, 2009 3:34 PM
Subject: RE: using breadboards
You are looking at the wrong place for making a PDA even if it was just
for you personally. I said 274 for the development board after you design the
software on that and decide what components you want for example the 274$
development board I spoke of came with y-fi, 2 usb ports, blue tooth, and some
other things like keyboard input which you would have to design. Of course a
finished product would not need all of those or it would be a Pac mate. Anyway
the thing is you buy one dev board and develop your PDA idea. When you're done
you get the company who made the dev board to make you 5000 of them and your
off and running with the next Victor stream. Now I am not talking from left
field. I would suggest you call Marc at Levelstar and talk to him. He
developed the brail plus and Icon hardware and he will be able to explain it
much better when I was talking to him the other day he said and I quote, "you
may think you want to get into hardware design but you don't believe me you
don't." You really need to talk to people already in the industry.
I also know of another device that was a Linux pda that never made it to
market because it took 6 months to get a bread board working for it because you
have to match up the daughter boards and get all the polarities and voltages
right and in this case it was a sighted person doing it and he smoked a few
components just getting it to work. After that he had to get some kind of
software to actually compile and work on it. Why would you want to go through
that kind of hell when you can purchase a development board from either Samsung
or hell there are lots of companies that you can get atom dev boards from and I
am not even sure my $274 is the lowest cost I did see one that was $1000 for a
dev board and it was a 4 inch by 3 inch board that was pretty much a laptop in
a tiny box. These dev boards come with an operating system that works on
them, heck most of them come with both windows CE and Linux so you can choose
Shrug do what you want but the work you will have to put into a PDA is
not worth it. This is the last I will say, without any other questions,
because if you want to fight with it more power to you just know you are in for
a long hard road to get nowhere and by the time you get there your device will
be so far behind the times it won't be worth having. For example if you are
planning on making this for more than yourself it costs in around $2000 to
$5000 just to get your power supply tested and passed all the regulations.
That's just one of the things you will have to do with your own design.
By the way as a side note, Tylor when do you graduate from High school?
This has nothing to do with what you're doing I am just interested.
Ken
From: programmingblind-bounce@xxxxxxxxxxxxx
[mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of Tyler Littlefield
Sent: Sunday, February 22, 2009 4:43 PM
To: programmingblind@xxxxxxxxxxxxx
Subject: Re: using breadboards
I figured I was totally scrued up.
It's just something I want to do.
I have an idea for a PDA I would like to build that sounds fun, just my
personal little PDA. I could totally customize it, and it would be cheaper than
anything I could buy more than likely.
I also want to just learn how these things work. I've often found them
interesting.
I have been digging around for some electronics tutorials, but haven't
found all that much that doesn't consist of a ton of pictures, etc etc.
----- Original Message -----
From: The Elf
To: programmingblind@xxxxxxxxxxxxx
Sent: Sunday, February 22, 2009 2:34 PM
Subject: Re: using breadboards
lol, odd list to send this to, but I used to do modular electronics, so
your in luck.
firstly, that setup will not do the job, you need to find a basic
electronics tutorial and read it, smile, not ragging on you, just the truth.
there are basic principles that you haven't grasped yet.
for a battery charger, you need the 110 volt (wall) plug, a
transformer, you need a full wave rectifier (I'll explain in a minute) and
you may want some filter capacitors, though there not really needed for a bat
charger.
now then, your first mistake is that your setup would have put wall
type current, called AC for alternating current, into resisters and batteries
which are DC (direct current) devices , that's a large shocking flam buoy
recipe.
number two, you said resisters to bring the current down, yes resisters
will drop current, but not in the way you need it to, this kind and type of
current step down is done with a transformer (that's why so many things with
removable wall plugs have that large box either at the wall end, or in the
middle of the cord, the box is mostly the transformer that reduces the voltage
and changes the amperage of the wall current.
and without the full or half wave bridge rectifier I mentioned before,
your still plugging DC parts into an ac circuit, another flam buoy!
the full wave bridge rectifier I have been mentioning is the component
that changes the AC current coming out of the transformer into DC current for
the batteries to charge off of.
here is the correct series of components for a simple power supply:
1. 110 volt power plug, which you attach to a specific set of contacts
on a 110 AC to... (output voltage equals the number of batteries going into the
battery holder, times 1.5 volts) so if you have a battery clip for 2 batteries,
then its 3 volts, if its four then it's six volts) AC transformer (note here,
all the transformer does is change the voltage and amperage of the power, not
its type, at this point you still have AC current running through the thing).
3. to the output side of the transformer you attach the input leads off
the full wave bridge rectifier (this is the device that changes the power from
AC, to DC so its the same type of current as your batteries).
4. to the output side of the FWBR you can either:
4-1. insert two filter capacitors to screen out noise the circuitry
generates, but this is not needed in a simple charger(*note,! the filter
capacitors have to be hooked up the correct way, one end is positive one
negative).
or,
4-2. attach your battery holder, making sure you get the polarity of
the wires correct to the battery holder , or your making a loud bang and a lot
of stink and a hazard out of your batteries.
another point, this simple setup has no way, like many chargers you
buy do now a days, to tell when the batteries are fully charged, and stop
trying to charge them, and this will heat up, and eventually give you another
ka boom.
the circuitry for a regulator is not to hard, but I can't pull it out
of my head like I can a simple power supply.
that is the basics of a power supply and it will work as a charger.
and it will not cost much, but why reinvent the wheel, unless your going to try
for some work in the electronics field? which I would not advise, some of the
stuff is extremely complex, and some of it quite delicate, and none of it is
marked in a method that can be read with our current tech abilities.
laters,
inthane
----- Original Message -----
From: Tyler Littlefield
To: programmingblind@xxxxxxxxxxxxx
Sent: Sunday, February 22, 2009 12:06 PM
Subject: using breadboards
Hello,
I'm looking to start using breadboards to create some small things.
I'd like to start off with something small, possibly a battery
charger or something similar.
I found a small tutorial on instructables, but not totally sure how
to get going.
It explained how things work somewhat, but not accurately enough for
me.
It mainly used pictures to explain, which didn't do me a whole lot of
good.
Any ideas on how I can set this up?
I understand the polarity--hooking one negative end to the positive
etc so that the circuit forms a loop, I'm just not sure how to do what I want.
So, here's my idea.
If I figure out the layout, I can set up a power cable going from the
outlet to the breadboard.
Then I can place in jumpers to bridge the gap.
I can take the 120 volts down to 9 with some resisters (?) and hook a
battery pack to the other end that will charge the batteries.
I'm thinking I'm way off, but... ideas would be great.
If I could, I'd like to set it up so it'd charge like 4 at once, then
I could cut down the 120 to 36. Possibly put in a heat sink to keep it from
getting really hot.
Other related posts:
