RE: making network cables
- From: "Ken Perry" <whistler@xxxxxxxxxxxxx>
- To: <programmingblind@xxxxxxxxxxxxx>
- Date: Fri, 19 Nov 2010 22:20:50 -0500
Um believe me I would find a 19 year old female student to help run my
cable.
Ken
-----Original Message-----
From: programmingblind-bounce@xxxxxxxxxxxxx
[mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of Bryan Schulz
Sent: Friday, November 19, 2010 5:40 PM
To: programmingblind@xxxxxxxxxxxxx
Subject: Re: making network cables
not when you are custom installing in a home built before ethernet and don't
really want someone in your house.
measured runs, drilled holes in floors and now have rj45 access up and down
stairs plus living room at an average of 18 to 24 cents per foot with wall
junction blocks, plugs and boots and no worries about self crimped or
crosswired errors.
Bryan Schulz
----- Original Message -----
From: "The Elf" <inthaneelf@xxxxxxxxxxxxxx>
To: <programmingblind@xxxxxxxxxxxxx>
Sent: Friday, November 19, 2010 2:54 PM
Subject: Re: making network cables
> lol, its actually cheaper ken's method
>
> elf
> Moderator, Blind Access Help
> Owner: Alacorn Computer Enterprises
> Specialists in customized computers and peripherals
> - own the might and majesty of a Alacorn!
> www.alacorncomputer.com
> proprietor, The Grab Bag,
> for blind computer users and programmers
> http://grabbag.alacorncomputer.com
>
> ----- Original Message -----
> From: "Bryan Schulz" <b.schulz@xxxxxxxxxxxxx>
> To: <programmingblind@xxxxxxxxxxxxx>
> Sent: Thursday, November 18, 2010 10:15 PM
> Subject: Re: making network cables
>
>
>> exactly or measure your runs and find a place on the net and custom order
>> what you need.
>>
>> Bryan Schulz
>>
>> ----- Original Message -----
>> From: "Ken Perry" <whistler@xxxxxxxxxxxxx>
>> To: <programmingblind@xxxxxxxxxxxxx>
>> Sent: Thursday, November 18, 2010 11:35 PM
>> Subject: RE: making network cables
>>
>>
>>> Good grief go to your local college with a box of wire the connectors
>>> and
>>> the tool sit outside a network class and then go in during lab. Wave
>>> around
>>> 20 $ and you can have 50 cables made in no time.
>>>
>>> Ken
>>>
>>> -----Original Message-----
>>> From: programmingblind-bounce@xxxxxxxxxxxxx
>>> [mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of Harmony Neil
>>> Sent: Thursday, November 18, 2010 11:42 AM
>>> To: programmingblind@xxxxxxxxxxxxx
>>> Subject: RE: making network cables
>>>
>>> That's assuming one has a pair of eyeballs around which are able enough
>>> to
>>> see colors.
>>>
>>> -----Original Message-----
>>> From: programmingblind-bounce@xxxxxxxxxxxxx
>>> [mailto:programmingblind-bounce@xxxxxxxxxxxxx] On Behalf Of Bryan Schulz
>>> Sent: 18 November 2010 00:46
>>> To: programmingblind@xxxxxxxxxxxxx
>>> Subject: Re: making network cables
>>>
>>> i picked up a phone/rj45/coax cable tester a few years ago at the
>>> national
>>> convention nfb market for about $20 but that still doesn't avoid wasting
>>> wire when you are too stubborn to ask somebody.
>>>
>>> Bryan Schulz
>>>
>>> ----- Original Message -----
>>> From: "Littlefield, Tyler" <tyler@xxxxxxxxxxxxx>
>>> To: <programmingblind@xxxxxxxxxxxxx>
>>> Sent: Wednesday, November 17, 2010 6:28 PM
>>> Subject: Re: making network cables
>>>
>>>
>>>> You could probably make one of those by hand. use two clips, and attach
>>>> a
>>>> beeper. You can send a current through and when the circuit is
>>>> complete,
>>>> the beeper will go off. Now that doesn't solve your problem of matching
>>>> up
>>>
>>>> on the terminals, but it does help.
>>>> On 11/17/2010 4:47 PM, Trouble wrote:
>>>>> As long as you trim off enough wire coating to let the wire fit the
>>>>> terminal end. making the crimp is no problem.
>>>>> Also as long as you have the wire for each hole the same on each end.
>>>>> If
>>>>> not for a paid job site, who cares the color.
>>>>> They do make tools that beep when each end is the same.
>>>>> had to make network setups in college and it was a blast. The
>>>>> instructor
>>>>> let me help the sighted ones in class, because they messed up to much.
>>>>>
>>>>>
>>>>> At 06:13 PM 11/17/2010, you wrote:
>>>>>> Hello Haden:
>>>>>>
>>>>>> I have made a few network cables with sighted help. There is no
>>>>>> independent way to figure out the wire colors. Some of the wires have
>>>>>> a
>>>>>> white stripe, so the blue wire is different from the blue-white wire.
>>>>>> Once you get the wires in order and trimmed, it is possible to slip
>>>>>> on
>>>>>> the plug and crimp it, but a sighted person should look through the
>>>>>> plug
>>>
>>>>>> to check.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Robert
>>>>>>
>>>>>> ----- Original Message ----- From: "Haden Pike"
>>>>>> <haden.pike@xxxxxxxxx>
>>>>>> To: <programmingblind@xxxxxxxxxxxxx>
>>>>>> Sent: Wednesday, November 17, 2010 2:18 PM
>>>>>> Subject: making network cables
>>>>>>
>>>>>>
>>>>>>> Hi all. We are making network cables in a class I am taking. To be
>>>>>>> specific, they are straight through cables. Can anyone provide any
>>>>>>> info
>>>
>>>>>>> on how I can do this particularly identifying what color each of the
>>>>>>> wires are. Is there a factor that will identify it?
>>>>>>> Thanks for any help.
>>>>>>> Haden
>>>>>>>
>>>>>>>
>>>>>>> __________
>>>>>>> View the list's information and change your settings at
>>>>>>> //www.freelists.org/list/programmingblind
>>>>>>
>>>>>> __________
>>>>>> View the list's information and change your settings at
>>>>>> //www.freelists.org/list/programmingblind
>>>>>
>>>>> Tim
>>>>> trouble
>>>>> Verizon FIOS support tech
>>>>> "Never offend people with style when you can offend them with
>>>>> substance."
>>>>> --Sam Brown
>>>>>
>>>>> Blindeudora list owner.
>>>>> To subscribe or info: //www.freelists.org/webpage/blindeudora
>>>>> __________
>>>>> View the list's information and change your settings at
>>>>> //www.freelists.org/list/programmingblind
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> Thanks,
>>>> Ty
>>>>
>>>> __________
>>>> View the list's information and change your settings at
>>>> //www.freelists.org/list/programmingblind
>>>>
>>>
>>> __________
>>> View the list's information and change your settings at
>>> //www.freelists.org/list/programmingblind
>>>
>>>
>>> __________
>>> View the list's information and change your settings at
>>> //www.freelists.org/list/programmingblind
>>>
>>> __________
>>> View the list's information and change your settings at
>>> //www.freelists.org/list/programmingblind
>>>
>>
>> __________
>> View the list's information and change your settings at
>> //www.freelists.org/list/programmingblind
>>
>
> __________
> View the list's information and change your settings at
> //www.freelists.org/list/programmingblind
>
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
__________
View the list's information and change your settings at
//www.freelists.org/list/programmingblind
Other related posts:
